BSOD win 7 ult x64, after fresh install!


  1. Posts : 5
    Windows 7 ultimate x64
       #1

    BSOD win 7 ult x64, after fresh install!


    ok so i have an alienware area 51 with dual nvidia gtx 480 video cards.
    i was getting constant bluescreens so i spoke to alienware crapsupport and they told me to reinstall windows. which i did. low and behold a few minutes in i start getting blue screens.

    At first the bsdo were in regards to the iastor driver, which i updated and then the blue screens switched over to ntoskrnl blue screen. but this last bsod was iastor again. not sure what to do.

    I am not sure what else to look for i have attached the last few dmps in hopes someone can help me. i am having to post this from safe mode, it doesnt stay on long enough in regular mode to post.

    specs: 12gb ram, dual gtx480 video cards, raid 0 ssd drives for C and raid 1 for data drive(1.5tb sata drives).

    i am attaching a zip of the last few dmps, as well as a screenshot from bluescreenviewer and device manager with some driver version.
    any help would be much appreciated!
    thanks!
      My Computer


  2. Posts : 5,405
    Windows 7 Ultimate 64bit SP1
       #2

    Hi and welcome to SF :)



    You need to update your Intel Storage drivers



    http://downloadcenter.intel.com/Default.aspx



    http://downloadcenter.intel.com/Deta...-bit*&lang=eng




    Finish
    with this step and post back with any results.
      My Computer


  3. Posts : 5
    Windows 7 ultimate x64
    Thread Starter
       #3

    did that, looked good started doing windows updates, then got more bsod.
    attached are the dmps as well as the screenshot.
      My Computer


  4. Posts : 5
    Windows 7 ultimate x64
    Thread Starter
       #4

    JUST GOT another bluescreen, this time it says fltmgr.sys i have attached the dump
      My Computer


  5. Posts : 5
    Windows 7 ultimate x64
    Thread Starter
       #5

    ok i figured out the k57nd60a was related to the nic drivers so i updated the drivers.
    but got a BSOD now with regards to ntoskrnl.exe. i have attached the minidmp and screenshot.
      My Computer


  6. Posts : 5,405
    Windows 7 Ultimate 64bit SP1
       #6

    Update this software\driver


    Silicon Image driver - comes with package for the SIxxxx drivers


    Silicon Image - Support


    First
    read this tutorial then run RAM - Test with Memtest86+



    Post
    back here the results.
      My Computer


  7. Posts : 5
    Windows 7 ultimate x64
    Thread Starter
       #7

    checked, it already has the latest driver installed for that sata 3132 card.
    going to run the memory test and post back.
    and fyi it bluescreened again with the same ntoskrnl driver.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:18.
Find Us