Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System freezes or goes into Blue Screen after load

23 Oct 2011   #1
immeronline

Windows 7 Ultimate x64
 
 
System freezes or goes into Blue Screen after load

Hi.
My system (win7 ultimate 64 bit - clean install) was running stable until a few months ago.
At almost every start in the morning it freezes og goes into Blue Screen (last time it said: DRIVER_IRQL_NOT_LESS_OR_EQUAL) just after load.
I usually keep restarting 3-10 times until it gets stable again and I can work on the machine the rest of the day. Can anyone help please by giving me advice on how to analyse on whates going wrong and how to fix this?
In advance: Thanks!


My System SpecsSystem Spec
.
23 Oct 2011   #2
panais

Windows 7 Ultimate 64bit SP1
 
 

Hi.

You dont have any nimidumps in your folders.

You must enable minidump Dump Files - Configure Windows to Create on BSOD

Wait for a new crash and reupload the crash\bsod folder.
My System SpecsSystem Spec
24 Oct 2011   #3
immeronline

Windows 7 Ultimate x64
 
 
Crash DATA

Thanks Panais.

Attached now the data of the "daily" crash...

Thomas
My System SpecsSystem Spec
.

24 Oct 2011   #4
panais

Windows 7 Ultimate 64bit SP1
 
 

Remove Mcafee from your system.



Download and install Microsoft Security Essentials




First read carefully
the tutorial then run ram-test-memtest86





Finish
with these steps and post back with any results.
My System SpecsSystem Spec
25 Oct 2011   #5
immeronline

Windows 7 Ultimate x64
 
 
Still crashing

Hi.
Removed the McAfee and the RAM test passed.
Still crashing - please see the dump file...
My System SpecsSystem Spec
25 Oct 2011   #6
panais

Windows 7 Ultimate 64bit SP1
 
 

Update JMicron RAID software\driver

Driver
My System SpecsSystem Spec
28 Oct 2011   #7
immeronline

Windows 7 Ultimate x64
 
 
:: Thanks ::

for your help!
Things actually got worse. The PC would not start at the end (black screen).
By intuition I removed 2 of my MEMORY (RAM) blocks
and now everythings works just fine.
I appreciate your commitment!
Thomas
My System SpecsSystem Spec
28 Oct 2011   #8
panais

Windows 7 Ultimate 64bit SP1
 
 

You removed a ram and the pc works fine.....this is a bad ram or a bad motherboard slot.

Well you "fix" it,thats the important.

Thanks for posting back,you help us to help! :)
My System SpecsSystem Spec
Reply

 System freezes or goes into Blue Screen after load




Thread Tools




Similar help and support threads
Thread Forum
blue screen when idling or light load, or just sometimes randomly.
keep getting bsods on idle. the strangest part is that i can prevent the bsods by putting a bit of load in the system, like running a game in the background while im browsing. here is what i found on one of the dmp files. Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64...
BSOD Help and Support
PC freezes after bios load, black screen with curser flashing
Hello, been having this problem for about a month. I had installed pinnacle drivers and had no problems, but one day I connected my dvc100 capture device and my computer restarted. Ever since then when I start my computer it loads the bios then hangs on black screen with the curser flashing in the...
General Discussion
Black not blue screen of death when system under moderate load
Hi, I am going through some problems with my system dying on me, and was hoping to get a second opinion by having someone look over my system information. I built my system about 6 months ago my spec are AMD Phenom II 1100T 3.3gh MSI 890FXA-GD65 Motherboard Corsair Vengeance memory 8G
BSOD Help and Support
Blue screen error, now windows won't load
I am at a loss here. I was checking emails today and I got a blue screen of death on Windows 7. I, stupidly, didn't take a screen capture, however the error message had to do with winSys32.exe, and then the usually memory dump messages. I rebooted into safe mode and tried running Spybot, but it...
General Discussion
Freezes and Blue Screen
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: a BCP1: FFFFFFFFFFFFFFEC BCP2: 0000000000000002 BCP3: 0000000000000001
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:09.
Twitter Facebook Google+