New
#1
Freezing then crashing into BS. Suggest please
Hello everybody!
I want to ask you for help. Why is my PC always crashes after 10-15 minutes of playing but when i'm not playing - it is good - never crashed during common using.
After the freezing it shows a blue screen.
Please help me understand what is wrong with my PC? It is so much annoying when you want to have some "relax time", play your favorite game and then this situation destroys my mood.
Those who can help in analyzing information from a file - revoke, please help!
Here is the info within .dmp file that created after the crash:
Regards, Sam!Code:Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\102511-19422-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: *** Invalid *** **************************************************************************** * Symbol loading may be unreliable without a symbol search path. * * Use .symfix to have the debugger choose a symbol path. * * After setting your symbol path, use .reload to refresh symbol locations. * **************************************************************************** Executable search path is: ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* Unable to load image ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Machine Name: Kernel base = 0xfffff800`03259000 PsLoadedModuleList = 0xfffff800`0349e650 Debug session time: Tue Oct 25 18:58:59.589 2011 (UTC + 4:00) System Uptime: 0 days 1:40:03.774 ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* Unable to load image ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Loading Kernel Symbols ............................................................... ................................................................ ........................... Loading User Symbols Loading unloaded module list ...... *** WARNING: Unable to verify timestamp for hal.dll *** ERROR: Module load completed but symbols could not be loaded for hal.dll ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 9C, {0, fffff80000ba8bb0, 0, 0} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* Probably caused by : ntoskrnl.exe ( nt+7fd00 ) Followup: MachineOwner --------- 0: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* MACHINE_CHECK_EXCEPTION (9c) A fatal Machine Check Exception has occurred. KeBugCheckEx parameters; x86 Processors If the processor has ONLY MCE feature available (For example Intel Pentium), the parameters are: 1 - Low 32 bits of P5_MC_TYPE MSR 2 - Address of MCA_EXCEPTION structure 3 - High 32 bits of P5_MC_ADDR MSR 4 - Low 32 bits of P5_MC_ADDR MSR If the processor also has MCA feature available (For example Intel Pentium Pro), the parameters are: 1 - Bank number 2 - Address of MCA_EXCEPTION structure 3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error 4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error IA64 Processors 1 - Bugcheck Type 1 - MCA_ASSERT 2 - MCA_GET_STATEINFO SAL returned an error for SAL_GET_STATEINFO while processing MCA. 3 - MCA_CLEAR_STATEINFO SAL returned an error for SAL_CLEAR_STATEINFO while processing MCA. 4 - MCA_FATAL FW reported a fatal MCA. 5 - MCA_NONFATAL SAL reported a recoverable MCA and we don't support currently support recovery or SAL generated an MCA and then couldn't produce an error record. 0xB - INIT_ASSERT 0xC - INIT_GET_STATEINFO SAL returned an error for SAL_GET_STATEINFO while processing INIT event. 0xD - INIT_CLEAR_STATEINFO SAL returned an error for SAL_CLEAR_STATEINFO while processing INIT event. 0xE - INIT_FATAL Not used. 2 - Address of log 3 - Size of log 4 - Error code in the case of x_GET_STATEINFO or x_CLEAR_STATEINFO AMD64 Processors 1 - Bank number 2 - Address of MCA_EXCEPTION structure 3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error 4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error Arguments: Arg1: 0000000000000000 Arg2: fffff80000ba8bb0 Arg3: 0000000000000000 Arg4: 0000000000000000 Debugging Details: ------------------ ***** Kernel symbols are WRONG. Please fix symbols to do analysis. ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ADDITIONAL_DEBUG_TEXT: Use '!findthebuild' command to search for the target build information. If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols. MODULE_NAME: nt FAULTING_MODULE: fffff80003259000 nt DEBUG_FLR_IMAGE_TIMESTAMP: 4d9fdd5b BUGCHECK_STR: 0x9C_GenuineIntel CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from fffff80003222818 to fffff800032d8d00 STACK_TEXT: fffff800`00ba8b78 fffff800`03222818 : 00000000`0000009c 00000000`00000000 fffff800`00ba8bb0 00000000`00000000 : nt+0x7fd00 fffff800`00ba8b80 00000000`0000009c : 00000000`00000000 fffff800`00ba8bb0 00000000`00000000 00000000`00000000 : hal+0x12818 fffff800`00ba8b88 00000000`00000000 : fffff800`00ba8bb0 00000000`00000000 00000000`00000000 00000000`00000000 : 0x9c STACK_COMMAND: kb FOLLOWUP_IP: nt+7fd00 fffff800`032d8d00 48894c2408 mov qword ptr [rsp+8],rcx SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt+7fd00 FOLLOWUP_NAME: MachineOwner IMAGE_NAME: ntoskrnl.exe BUCKET_ID: WRONG_SYMBOLS Followup: MachineOwner --------- 0: kd> lmvm nt start end module name fffff800`03259000 fffff800`03842000 nt T (no symbols) Loaded symbol image file: ntoskrnl.exe Image path: ntoskrnl.exe Image name: ntoskrnl.exe Timestamp: Sat Apr 09 08:15:23 2011 (4D9FDD5B) CheckSum: 0054E319 ImageSize: 005E9000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Last edited by Brink; 26 Oct 2011 at 11:58. Reason: code box