New
#31
Pagefile changed to 4092MB
Re-ran torture test for an hour and all workers passed without errors.
CPU max temps nice and stable at:
Core0 57
Core1 52
Core2 54
Core3 54
I guess its DRAM up to 1.56v now?
Regards,
Golden
Pagefile changed to 4092MB
Re-ran torture test for an hour and all workers passed without errors.
CPU max temps nice and stable at:
Core0 57
Core1 52
Core2 54
Core3 54
I guess its DRAM up to 1.56v now?
Regards,
Golden
I had the same error about the swap file being too small on one core. I let it continue and it started.
Temps look good Colin, new thermal paste job?
If you passed the torture test, run your system at these setting for a while and see if you get a crash.
You might run memtest86+ again and see if it throws any errors.
If it passed the Prime95 torture test, it might be stable now.
Let us know if you get anymore crashes.
Appologies for jumping in your thread Colin.
Dave do those settings in Prime95 stressing the CPU or mostly RAM?
Thanks Dave.
Last night I increased DRAM = 1.560v, and also turned on the "Turbo" RAM performance mode, and then ran the torture test for 2 hours - all workers passed without errors.
Should I step DRAM back down again to 1.500v?
Regards,
Golden