New
#1
Yet another BSOD report
I have googled my error numbers, and could not find anything. I hope you guys can help me. I have Windows 7 Ultimate x64. I have run temperature and memory tests and it all looked good.
My Disk drive test failed, but I used the Seagate tool to "repair" it, and it passes now.
The reason I ran all those tests is becaue the computer randomly restarted all the time. (It still crashes randomly after the "repar.") I read how I could make the BSOD appear instead of a reset, so I did that. This is the report:
--
A problem has been detector and windows has beet
shut down to prevent damage to your computer.
END_OF_NT_EVALUATION_PERIOD
If this is the first time you've seen this stop
error screen,restart your computer. If this screen
appears again, follow these steps:
Check to make sure any new hardware or software is
properly installed.If this is a new installation,
ask your hardware or software manufacturer for any
windows updates you might need.
...
Technical information:
*** STOP: 0x00000098(0x16FD6980,0x01CC683A,0x00000000, 0x00000000)