Yet another BSOD report


  1. Posts : 2
    Windows 7 Ultimate x64
       #1

    Yet another BSOD report


    I have googled my error numbers, and could not find anything. I hope you guys can help me. I have Windows 7 Ultimate x64. I have run temperature and memory tests and it all looked good.

    My Disk drive test failed, but I used the Seagate tool to "repair" it, and it passes now.

    The reason I ran all those tests is becaue the computer randomly restarted all the time. (It still crashes randomly after the "repar.") I read how I could make the BSOD appear instead of a reset, so I did that. This is the report:
    --

    A problem has been detector and windows has beet
    shut down to prevent damage to your computer.

    END_OF_NT_EVALUATION_PERIOD

    If this is the first time you've seen this stop
    error screen,restart your computer. If this screen
    appears again, follow these steps:

    Check to make sure any new hardware or software is
    properly installed.If this is a new installation,
    ask your hardware or software manufacturer for any
    windows updates you might need.
    ...

    Technical information:
    *** STOP: 0x00000098(0x16FD6980,0x01CC683A,0x00000000, 0x00000000)
      My Computer


  2. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #2

    Is your Windows 7 fully activated?
    https://www.sevenforums.com/crashes-d...tructions.html
      My Computer


  3. Posts : 2
    Windows 7 Ultimate x64
    Thread Starter
       #3

    Yes.
    I'll try. I was simply trying to figure out where I can look up the error codes I got. The wiki was not the answer since there is no "98" there.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 13:51.
Find Us