yowanvista said:
amraf said:
Hello
I ran the stress\test and it failed
(see below)
[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #1
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Nov 2 21:37] Hardware failure detected, consult stress.txt file.
[Nov 2 21:37] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Nov 2 21:37] Worker stopped.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:39] FATAL ERROR: Rounding was 0.4682617188, expected less than 0.4
[Nov 2 21:39] Hardware failure detected, consult stress.txt file.
[Nov 2 21:39] Torture Test completed 0 tests in 1 minutes - 1 errors, 0 warnings.
[Nov 2 21:39] Worker stopped.
This means that a problem with your CPU, it should be replaced.

I agree!