BSOD: Lots of random crashes (0xc0000005\0x00000000\0x1000008e)

Hello
Thanks for reading this and hopefully pointing me in the right direction
I have attached my:
Mini Dump files
Hijackthis
Driverlist
System info
And a few other useful log files that I have put together that I hope will help

For a Few months now My Computer has been rebooting due to a System error (blue screen of death) At first I was running Windows XP – I ran Memtest and updated all my drivers and ran scandisk everything passed and the updates did not help. I was running out of disk space so this week I bought myself a new 2bt hard disk, when I was in the shop I noticed that they were selling Windows 7 home ultimate at a discount – So I bought it (I had already ran the compatibility tool on my PC so I know the hardware would be supported) only to find that my Blue Screens of death followed me to Windows 7 on my bran new hard drive.
I have read a few posts on the Internet where my error codes point to a bad driver or a memory issue.
So on my new install of Windows 7I have updated all my drivers from the manufactures websites for everything (graphics,Lan,Audio,Motherboard,IDE,etc)
I ran Memtest+86 for 16 hours (allows 6 passes) Memtest did not report any issues with the memory
Even though my Windows 7 install is less than 24hours old I have ran sfc.exe \scannow and ran scandisk to ensure my Hard disk is working ok. I read on another form that Adobe flash player “enable hardware acceleration” could be an issue, so I have disabled it.
There is no logic to when my PC gives a Blue screen, seems random, I could open a document – crash – then the same document will work fine.
I am thinking that's it's got to a hardware issue, but I am not sure what hardware is the issue
Thank you for your time and your help

Hello
Thanks for getting back to me
I do not over clock anything
I have attached the graphs from Occt (they look the same as your sample)

Hello
Sorry about that
Please find attached the right files

Hello
I ran the stress\test and it failed
(see below)
[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #1
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Nov 2 21:37] Hardware failure detected, consult stress.txt file.
[Nov 2 21:37] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Nov 2 21:37] Worker stopped.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:39] FATAL ERROR: Rounding was 0.4682617188, expected less than 0.4
[Nov 2 21:39] Hardware failure detected, consult stress.txt file.
[Nov 2 21:39] Torture Test completed 0 tests in 1 minutes - 1 errors, 0 warnings.
[Nov 2 21:39] Worker stopped.

amraf said:

Hello
I ran the stress\test and it failed
(see below)
[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #1
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Nov 2 21:37] Hardware failure detected, consult stress.txt file.
[Nov 2 21:37] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
[Nov 2 21:37] Worker stopped.

[Nov 2 21:37] Worker starting
[Nov 2 21:37] Setting affinity to run worker on logical CPU #2
[Nov 2 21:37] Beginning a continuous self-test to check your computer.
[Nov 2 21:37] Please read stress.txt. Choose Test/Stop to end this test.
[Nov 2 21:37] Test 1, 180000 Lucas-Lehmer iterations of M580673 using AMD K8 type-1 FFT length 28K, Pass1=112, Pass2=256.
[Nov 2 21:39] FATAL ERROR: Rounding was 0.4682617188, expected less than 0.4
[Nov 2 21:39] Hardware failure detected, consult stress.txt file.
[Nov 2 21:39] Torture Test completed 0 tests in 1 minutes - 1 errors, 0 warnings.
[Nov 2 21:39] Worker stopped.

This means that a problem with your CPU, it should be replaced.