Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD after driver verifier

04 Nov 2011   #1

Windows 7 Home Basix x64
BSOD after driver verifier

Plz check, thanks for more infos....

It's ntoskrnl.exe
Searching forum and no proper solution.

Startup repair doesn't help - can't fix the problem
sfc /scann... no errors
chkdsk /r ... no errors

My System SpecsSystem Spec
04 Nov 2011   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit

Quote   Quote: Originally Posted by BuzzFuzz View Post
Plz check, thanks for more infos....

It's ntoskrnl.exe
Searching forum and no proper solution.

Startup repair doesn't help - can't fix the problem
sfc /scann... no errors
chkdsk /r ... no errors
Hello there!

Seems like ATITool64.sys is causing to crashes. Please uninstall it and see if the system crashes again. Then turned off Drivers Verifier


N bytes of memory was allocated and more than N bytes are being referenced.
This cannot be protected by try-except.
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arg1: fffff980014ab000, memory referenced
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation
Arg3: fffff88003ff6192, if non-zero, the address which referenced memory.
Arg4: 0000000000000000, (reserved)

Debugging Details:

Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030af100

fffff880`03ff6192 66833800        cmp     word ptr [rax],0







TRAP_FRAME:  fffff880033c3af0 -- (.trap 0xfffff880033c3af0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff980014ab000 rbx=0000000000000000 rcx=fffff88003ff60fb
rdx=0000000000000046 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88003ff6192 rsp=fffff880033c3c80 rbp=0000000000000010
 r8=0000000000000000  r9=fffff880033c4210 r10=0000000000000000
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
fffff880`03ff6192 66833800        cmp     word ptr [rax],0 ds:fffff980`014ab000=????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002e289fc to fffff80002e7cc40

fffff880`033c3988 fffff800`02e289fc : 00000000`00000050 fffff980`014ab000 00000000`00000000 fffff880`033c3af0 : nt!KeBugCheckEx
fffff880`033c3990 fffff800`02e7ad6e : 00000000`00000000 fffff980`014ab000 00000000`00000000 fffff980`014aaff0 : nt! ?? ::FNODOBFM::`string'+0x4611f
fffff880`033c3af0 fffff880`03ff6192 : 00000001`0000000b 00000170`00000000 ffff0001`0000000b 00000170`0000000d : nt!KiPageFault+0x16e
fffff880`033c3c80 00000001`0000000b : 00000170`00000000 ffff0001`0000000b 00000170`0000000d fffff880`033c5000 : ATITool64+0x6192
fffff880`033c3c88 00000170`00000000 : ffff0001`0000000b 00000170`0000000d fffff880`033c5000 fffff880`033bf000 : 0x1`0000000b
fffff880`033c3c90 ffff0001`0000000b : 00000170`0000000d fffff880`033c5000 fffff880`033bf000 00000007`00000010 : 0x170`00000000
fffff880`033c3c98 00000170`0000000d : fffff880`033c5000 fffff880`033bf000 00000007`00000010 ffffffff`00000000 : 0xffff0001`0000000b
fffff880`033c3ca0 fffff880`033c5000 : fffff880`033bf000 00000007`00000010 ffffffff`00000000 00000000`00000000 : 0x170`0000000d
fffff880`033c3ca8 fffff880`033bf000 : 00000007`00000010 ffffffff`00000000 00000000`00000000 fffff880`033c4210 : 0xfffff880`033c5000
fffff880`033c3cb0 00000007`00000010 : ffffffff`00000000 00000000`00000000 fffff880`033c4210 fffff880`00000001 : 0xfffff880`033bf000
fffff880`033c3cb8 ffffffff`00000000 : 00000000`00000000 fffff880`033c4210 fffff880`00000001 fffff800`030a6300 : 0x7`00000010
fffff880`033c3cc0 00000000`00000000 : fffff880`033c4210 fffff880`00000001 fffff800`030a6300 00000000`00000000 : 0xffffffff`00000000


fffff880`03ff6192 66833800        cmp     word ptr [rax],0


SYMBOL_NAME:  ATITool64+6192

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ATITool64.sys



BUCKET_ID:  X64_0xD6_VRF_ATITool64+6192

Followup: MachineOwner

3: kd> lmvm ATITool64
start             end                 module name
fffff880`03ff0000 fffff880`03ffe000   ATITool64 T (no symbols)           
    Loaded symbol image file: ATITool64.sys
    Image path: \SystemRoot\system32\DRIVERS\ATITool64.sys
    Image name: ATITool64.sys
    Timestamp:        Wed Aug 08 22:12:26 2007 (46B9F272)
    CheckSum:         0001540C
    ImageSize:        0000E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
04 Nov 2011   #3

Windows 7 Home Basix x64

Is it possible because of this file comes lag in game?
My System SpecsSystem Spec

05 Nov 2011   #4
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit

Quote   Quote: Originally Posted by BuzzFuzz View Post
Is it possible because of this file comes lag in game?
Not sure. I think the lagging is caused by Driver Verifier.
My System SpecsSystem Spec
05 Nov 2011   #5

Windows 10 Pro x64

Yes indeed. If you aren't surgical with what to watch, and rather go for a more blanket approach, you will introduce latency. Driver verifier adds some overhead, so that if something crashes, it does catch it - this takes system resources, both memory and CPU cycles.
My System SpecsSystem Spec

 BSOD after driver verifier

Thread Tools

Similar help and support threads
Thread Forum
Multiple BSOD. Driver Verifier Driver caught a driver corrupting
I have had BSOD for a while and being super busy I did not have time to look at it and get it fixed. Well Being a computer guy I assumed I could fix it myself. But with tons of research and trying to use every guide I can find I decided to try here(probably should have came here first). Today I...
BSOD Help and Support
Windows 8 Pro x64 - BSOD with Driver Verifier
Hi all, This is my first post. Please excuse any failings therefore. Recently, over the last three days, I have been experiencing random BSOD's, atleast once a day. I have not added any new hardware or any new software that I am aware of apart from Windows Updates. I an running Driver...
BSOD Help and Support
Driver Verifier BSOD's
Hello, I have been having random crashes during all sorts of operations....watching a flash video,opening up a program,running a game or even at idle. Weird thing is that the pc never crashed whilst running torture tests with prime95 and furmark.Prime 95 completed 12 hours in blend run, and as...
BSOD Help and Support
Driver verifier BSOD
System will randomly lockup. It is very sporadic and I have tested vga, ram, and cpu using prime95, memtest as well as memtest86, furmark used for vga. 7hrs and 7 full runs of memtest 86, 0 errors. I feel hardware is solid. Upon enabling driver verifier the system bluescreens before even...
BSOD Help and Support
BSOD with Driver Verifier
I was getting some BSODs and I found out that it was due to my Lycosa Keyboard. But even after removing keyboard I am getting BSODs. My RAM is good (Memtest Pass for 8 hours). My hard disk is good. I reisntalled OS and installed just main drivers- 1. Intel Rapid Storage Technology 2. Nvidia...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:41.
Twitter Facebook Google+