Getting from IDE to ACHI without BSOD


  1. killbox
    Posts : 18
    Windows 7 enterprise 64bit
       New #1

    Getting from IDE to ACHI without BSOD


    Hi guys, I'm having problem getting from IDE mode to ACHI. I had the achi mode working in the first place, but I had to do a repair install due to some bad drivers, and now it's back to IDE mode again.

    I've tried to change the achi in regedit to 0, where it was and then change to achi mode in bios, but then I get a bsod. Any suggestions?
      My Computer
    Quote Quote

  3. killbox
    Posts : 18
    Windows 7 enterprise 64bit
    Thread Starter
       New #2

    I've tried setting it to 1 in regedit as well without success. I've gotten mails from sevenforums with replys, but they down show up here :/
      My Computer
    Quote Quote

  4. killbox
    Posts : 18
    Windows 7 enterprise 64bit
    Thread Starter
       New #3

    I got it to work by choosing raid in bios.
      My Computer
    Quote Quote

 

  Related Discussions
Hi all, I just got done installing an SSD in my older PC with Windows 7 64bit OS. Before installing the SSD I went into Bios and set it to ACHI mode, because I have read that is the best for SSD performance. However, I still have my old Windows XP installation on the HDD installed in my PC and...
Achi vs ide
in Performance & Maintenance

I think one of my hdds is failing and tried to run Seagate tools for Dos that I downloaded from Seagate's site and burned to a cd. The cd loads, but says "no devices recognized." I called Seagate and they said to change to Ide in the BIOS. In researching online, many people are saying...
Had numerous BSOD's since updating from IDE to ACHI using the upgrade tool from the MSoft website. Enabled verifier.exe earlier and rebooted - immediately a BSOD with a message about a rogue driver - please update your driver but did not state which one. Managed to reboot to disable the verifer...
ACHI Problems
in Hardware & Devices

Okay, my system is accurate under my profile...so on with my question. Thanks again to this forum, it has been a lifesaver! I just got the Corsair 800D case. One of the features is the Hot Swappable drive bays in the front. I thought I had previously enabled AHCI but I enabled AHCI for the...
I saw this topic by crispy Thred 7 https://www.sevenforums.com/drivers/43049-gigabyte-ga-p35-ds3-raid-driver.html sine then gigabyte have released these drivers for SATA GIGABYTE GA-P35-DS3 (Rev. 1.0) | Emaplaadid - Driver
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 11:19.
Find Us