Random BSOD #1033 BBCode: 1e

Windows 7 X64 installed. (retail)

Original OS was Vista.

This is a Dell Inspiron 1545 Laptop. A few years old, os is a few years old.

See what the experts can figure out. Its annoying because I come back and the system had rebooted randomly.

Code:

Problem signature:
  Problem Event Name:	BlueScreen
  OS Version:	6.1.7601.2.1.0.768.3
  Locale ID:	1033

Additional information about the problem:
  BCCode:	1e
  BCP1:	FFFFFFFFC0000005
  BCP2:	FFFFF80002C081C4
  BCP3:	0000000000000000
  BCP4:	000007FFFFFF0000
  OS Version:	6_1_7601
  Service Pack:	1_0
  Product:	768_1

Files that help describe the problem:
  C:\Windows\Minidump\111211-35755-01.dmp
  C:\Windows\Temp\WER-59810-0.sysdata.xml

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt

Havok welcome,

These crashes were caused by memory corruption.
Run these two tests to verify your memory and find which driver is causing the problem.

1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Driver Verifier - Enable and Disable

Do What JMH suggests FIRST.

It is a memory exception and those tests need to be done

I would also remove and replace Avast with Microsoft Security Essentials and I would remove all the DT software installed (ie daemon tools, etc)

Wow thanks!!!!! You guys are quick.

I'll start testing...

Let us know the results please.