New
#1
BSOD 0x7a_c000009d -Memory or Hdd error?
Hi all,
Nice to find this useful forum.
We have a "tool" that actually works with 3 exactly similar small pcs(same devices-same programs, etc). So after the first BSODs I took an image from the pc that was ok and restored the the problematic pc. Everything worked at first but after about an hour the BSOD returned.After the BSOD the computer cannot log in to windows, not even at safe mode.Only option I have to restore from the image again but the problem occurs again after some time.I took memory.dmp file and analyze it with windows debugger.So below you can see the results:
So what do you think the problem is?Memory or Hdd error?Or it can be something else?*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: 00000020, lock type that was held (value 1,2,3, or PTE address)
Arg2: c000009d, error status (normally i/o status code)
Arg3: 86241bdc, current process (virtual address for lock type 3, or PTE)
Arg4: 00000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
Debugging Details:
------------------
ERROR_CODE: (NTSTATUS) 0xc000009d - STATUS_DEVICE_NOT_CONNECTED
DISK_HARDWARE_ERROR: There was error with disk hardware
BUGCHECK_STR: 0x7a_c000009d
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: INTEL_CPU_MICROCODE_ZERO
PROCESS_NAME: System
CURRENT_IRQL: 1
LAST_CONTROL_TRANSFER: from 82c48a90 to 82c88b5c
STACK_TEXT:
8ad48c04 82c48a90 86241ba0 86241ba8 00000000 nt!MiWriteComplete+0x22d
8ad48c24 82cc5746 8679c048 8ad48c50 8ad48c5c nt!IopCompletePageWrite+0x4d
8ad48c74 82c92685 00000000 00000000 00000000 nt!KiDeliverApc+0x111
8ad48cb8 82c914f7 84cb5e08 84cb5d48 82d5dd90 nt!KiSwapThread+0x24e
8ad48ce0 82cbd2a8 84cb5d48 84cb5e08 00000000 nt!KiCommitThreadWait+0x1df
8ad48d24 82c46ed8 00000000 00000000 84cb5d48 nt!KeWaitForGate+0x158
8ad48d50 82e1df5e 00000000 94996613 00000000 nt!MiModifiedPageWriter+0x39
8ad48d90 82cc5219 82c46e9f 00000000 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!MiWriteComplete+22d
82c88b5c cc int 3
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!MiWriteComplete+22d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce78a09
IMAGE_NAME: memory_corruption
FAILURE_BUCKET_ID: 0x7a_c000009d_nt!MiWriteComplete+22d
BUCKET_ID: 0x7a_c000009d_nt!MiWriteComplete+22d
Followup: MachineOwner
---------
I also run memtest (only one pass) but no problem detected.
Unfortunately I cannot replace any memory or hdd, because the tool is under guarantee so I cannot physically open it and change hdds/memories etc between pcs.
So I would be grateful if you could suggest me any other test I could run, or if you recognise the problem.
Thanks in advance,
Please forgive me for any mistakes , since this is my first post.