BSOD on Vostro 3300 at startup

Hi guys!
Hi,
I Have Vostro 3300 i3 , Corsair 8GB (2*4GB) 1333MHZ, 120GB Agility 3 SSD.

Installed a fresh copy of windows 7 Enterprise x64.

I get a blue sceen every second time I turn my comp on, something strange.

What can it be?

After I boot again I see that window:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1037

Additional information about the problem:
BCCode: 50
BCP1: FFFFF80000CB9C40
BCP2: 0000000000000000
BCP3: FFFFF80002E03418
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\120511-7987-01.dmp
C:\Users\Yan\AppData\Local\Temp\WER-17113-0.sysdata.xml

Read our privacy statement online:
Search Microsoft.com [...] cid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I have included DUMP file an XML log.
dmp: 120511-7987-01.dmp
xml: WER-17113-0.sysdata.xml

thanks in advance!!!

These crashes were caused by memory corruption (probably from a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!


1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



2-Driver verifier

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Driver Verifier - Enable and Disable


Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

thanks for the fast reply.
just one question, is that possible to check what did the problem from the dump file?

hitit said:

thanks for the fast reply.
just one question, is that possible to check what did the problem from the dump file?

Memory corruption did cause the crash. to find out which driver caused that you need to run the tests

thanks!! ill try it and update the thread

hitit said:

thanks!! ill try it and update the thread

Good luck