Constant BSOD after few minutes of gameplay of BF3, TF2


  1. Posts : 3
    Windows 7 Ultimate x64
       #1

    Constant BSOD after few minutes of gameplay of BF3, TF2


    I've just began to get BSODs after playing these video games, and I have no idea why I'm getting these problems. I personally and not familiar with reading dump files, and it'd be great if someone could provide me with some insight as to what's happening while I get the BSODs.
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    Frank2368 said:
    I've just began to get BSODs after playing these video games, and I have no idea why I'm getting these problems. I personally and not familiar with reading dump files, and it'd be great if someone could provide me with some insight as to what's happening while I get the BSODs.

    These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

    If you are overclocking anything reset to default before running these tests.
    In other words STOP!!!



    1-Memtest.
    *Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

    *Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.

    Any errors are indicative of a memory problem.

    If a known good stick fails in a motherboard slot it is probably the slot.

    RAM - Test with Memtest86+



    2-Driver verifier

    I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
    Driver Verifier - Enable and Disable


    Further Reading
    Using Driver Verifier to identify issues with Windows drivers for advanced users


    ALSO

    Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

    They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

    Use this SPTD uninstaller DuplexSecure - Downloads http://duplexsecure.com/faq

    when you're done you can use this Freeware:

    MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

    http://www.magiciso.com/download.htm
      My Computer


  3. Posts : 3
    Windows 7 Ultimate x64
    Thread Starter
       #3

    Thanks, I will do these tests. I thought it was definitely my beta video card driver, but I didn't know for sure. I'll find out after I do the tests I guess!
      My Computer


  4. Posts : 28,845
    Win 8 Release candidate 8400
       #4

    Frank2368 said:
    Thanks, I will do these tests. I thought it was definitely my beta video card driver, but I didn't know for sure. I'll find out after I do the tests I guess!
    Didnt point towards your video driver but the tests will tell.
      My Computer


  5. Posts : 3
    Windows 7 Ultimate x64
    Thread Starter
       #5

    zigzag3143 said:
    Frank2368 said:
    Thanks, I will do these tests. I thought it was definitely my beta video card driver, but I didn't know for sure. I'll find out after I do the tests I guess!
    Didnt point towards your video driver but the tests will tell.
    Can I simply mount the ISO on MagicISO and boot with it?
      My Computer


  6. Posts : 28,845
    Win 8 Release candidate 8400
       #6

    Frank2368 said:
    zigzag3143 said:
    Frank2368 said:
    Thanks, I will do these tests. I thought it was definitely my beta video card driver, but I didn't know for sure. I'll find out after I do the tests I guess!
    Didnt point towards your video driver but the tests will tell.
    Can I simply mount the ISO on MagicISO and boot with it?
    Um what ISO?
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:02.
Find Us