Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Multiple BODs after hours of use, code 43 and 45

14 Dec 2011   #1

Windows 7 Premium 64 bit
Multiple BODs after hours of use, code 43 and 45

First let me begin with the fact that Iím not that great with troubleshooting computers, so I appreciate your patience.

My laptop has been getting the BOD several times a day and reboots itself. This has been happening for about 2 weeks now. It first started with a notification that the USB device connected to my computer was not recognized Ė only I didnít have anything connected to any USB port. I get that notification several times a day, again with nothing connected to the computer. When I have clicked on the error notifications I have gotten this message:

ďStandard USB Host Controller, Port#0002 Hub_#0003
Windows has stopped this device because it has reported problems (code 43)Ē sometimes itís a code 45 and the port and hub numbers change.

I can usually run the laptop without problems for the first several hours, but once it gets into the afternoon and evening the reboots start to occur.

Iíd appreciate any help you can give me.

Windows 7, 64-bit
OEM Ė I had to do a reinstall of Windows a couple of months ago after the laptop crashed after a service pack 1 installation.
ASUS U50F series, 2 years old

I downloaded BlueScreenView and this seems to be the most common error: (sorry, not sure if this info is in the zip I attached)
Dump File : 121211-27939-01.dmp
Crash Time : 12/12/2011 4:43:44 PM
Bug Check Code : 0x000000fe
Parameter 1 : 00000000`00000008
Parameter 2 : 00000000`00000006
Parameter 3 : 00000000`00000005
Parameter 4 : fffffa80`06802b20
Caused By Driver : usbhub.sys
Caused By Address : usbhub.sys+12a60
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7cc40

My System SpecsSystem Spec
14 Dec 2011   #2

Windows 7 Premium 64 bit

I don't know if this matters, but the first System Health Report I generated happened right before a BOD. I just ran it again, and different things were flagged. I've attached it in case it will help.

Thanks again for any help you can offer.
My System SpecsSystem Spec
15 Dec 2011   #3

Windows 7 Premium 64 bit

Can anyone offer some help - please?????

Thanks much!
My System SpecsSystem Spec

16 Dec 2011   #4

Windows 7 Premium 64 bit

Thought I'd try one last time to bump this up - can anyone help me with my problem? It would be greatly appreciated.
My System SpecsSystem Spec

 Multiple BODs after hours of use, code 43 and 45

Thread Tools

Similar help and support threads
Thread Forum
Multiple BSOD's (Code:124) And Freezes
My computer tends to crash, and freeze after being on for more than an hour a day. I ran Memory Tests, Checked My Internal Wires, and Ran A Hard drive sector check/repair and everything turned out normal. Also all of my drivers are up to date as well as my BIOS. -MY Q6600 is running on...
BSOD Help and Support
Constant BODs due to usb driver
My laptop has been getting the BOD several times a day and reboots itself constantly (been going on for over 2 weeks). The Blue Screen always indicates BUGCODE_USB_DRIVER When I look at the dump files, this is usually indicated Caused By Driver : usbhub.sys Caused By Address : usbhub.sys+12a60 ...
BSOD Help and Support
6 hours of Prime95 and 2.5 hours of OCCT.
Is this enough to say my processor is stable? Temperatures stopped increasing loooooooooooong ago. I accidentally messed up the Prime95 test - I was going to run it for a day, but needed access to my computer. Using my computer forced two of the workers to stop due to insufficient swap space/RAM. ...
PC Custom Builds and Overclocking
F24 Key code constantly registering = multiple issues.
Hi everyone, I can't seem to track this down and I don't really want to do a clean install after setting up my environment for work. I'm not sure if this happened out of the box or not. I'm hoping someone will have magic solution that will save hours of reinstalling... I first noticed the...
General Discussion
BODs have been happening for well over a year.
I'm finally just getting a bit annoyed at all these:mad:, None are dumping as of late so all i got for you are these. I have Windows 7 64 home premium. Upgraded via the free upgrade program from Vista 64 home premium. this is the on that may give the most info Can someone please help me at...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:45.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App