Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD coming randomly, reports in attachment

26 Dec 2011   #1

Windows 7 Ultimate x64
BSOD coming randomly, reports in attachment


I'm having this problem since i've changed some of the pc hardware. Basically after the windows installation, everytime i try to maximize a window, the pc freeze, showing some vertical lines on the screen and after 1 min or less it reboots. this is the notification it gives after loading the windows:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.
Locale ID: 1050
Additional information about the problem:
BCCode: 116
BCP2: FFFFF880044B18C8
BCP3: 0000000000000000
BCP4: 000000000000000D
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:


MBO: Gigabyte GA-MA770-UD3 v2.0
CPU: Amd Phenom II X4 630
VGA: VTX3D Radeon HD 5750 1GB DDR5 HV2 (replaced the old gainward nvidia 6600GT 128MB)
PSU: Corsair CX500 (replaced the old Aopen 350W)
RAM: Transcend DDR2 800 2GB x2 (old configuration had only one module, i've added another one together with the PSU and VGA)

Now, first i've installed the original vga drivers that came with the card - PC kept crashing,
I've downloaded the latest VGA drivers - same result
Updated the BIOS - same result
Removed the new ram module - same result

Now i don't have any other ideas what to do next.

If someone can help me by looking at the dump files that are attached i would be very thankful.
Is it possible that the graphics card is faulty?

Thanks, best regards

EDIT: sorry, the OS is Windows 7 x64 professional retail

My System SpecsSystem Spec
27 Dec 2011   #2

Windows 7 Ultimate x64

Now it happened again when i started bsplayer for the first time. i've changed the renderer from default internal overlay to internal direct draw and after i selected it the computer crashed and a BSOD appeared. After restarting the bsplayer is running normally. On the BSOD there was a message about atikmpag.sys. the dump files are attached
My System SpecsSystem Spec

 BSOD coming randomly, reports in attachment

Thread Tools

Similar help and support threads
Thread Forum
BSOD coming up randomly. first only when playing movies, now random
Hi Everyone, A while ago my computer started tofreeze up when playing a movie.. I have been trying to locate the error but am unable to find out why this happens. Sometimes I can play a few movies and sometimes it freezes within seconds of playing a movie. Since two days the machines also starts...
BSOD Help and Support
BSOD coming up randomly.
So lately i'm getting these BSOD's. I tested my CPU, RAM and GPU. (Prime95, pass 7 memtest and furmark). No BSODs from that. I opened the .dmp file and this is the outcome: ******************************************************************************* * ...
BSOD Help and Support
BSOD coming randomly
Anyone know what to do? Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601. Locale ID: 1044
BSOD Help and Support
DIR 615 reports link at 300Mbps, windows reports 150Mbps
Hello there, Recently setup my home wifi network, i had been noticing that my link speed to any device through my Dlink DIR 615 router, was always 65Mbps (as reported by the device), i searched around that i should set the channel width to 'auto 20/40mhz' to gain speed; however now that i did...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:23.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App