Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD With 0x00000124

30 Dec 2011   #11
firsttimebuild

windows 7 32-64
 
 

Update! I've been playing around with the clock speeds on my processors and now I have it running at 3.0GHz which is only 200Mhz lower that it's stock frequency, I also disabled turbo mode in the bios and crashes seem to have stopped for now.

Update! I did have 1 more crash but this one was different than the ones I was getting before, A little notification popped up on the right hand side of my start bar and said "Your display driver has stopped responding" 3-4 seconds after that I had a BSOD.

I already have the lastest ATI/AMD Display drivers, Should I do a roll back and use a older version?


My System SpecsSystem Spec
.
30 Dec 2011   #12
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Have you followed this good advise?

Quote   Quote: Originally Posted by StalkeR View Post
Hello there. You can find more infor for that error here: Stop 0x124 - what it means and what to try
Please confirm and note the steps you have taken.

Your idle temps are fine.
My System SpecsSystem Spec
30 Dec 2011   #13
firsttimebuild

windows 7 32-64
 
 

Update: I set processor to 3.0Ghz - 200Mhz under default. I did'nt get any stop error's for 6 hours after doing this but as soon as I tried to play Battlefeild 3 it BSOD. I'm so annoyed at this problem!
My System SpecsSystem Spec
.

30 Dec 2011   #14
firsttimebuild

windows 7 32-64
 
 

Quote   Quote: Originally Posted by Dave76 View Post
Have you followed this good advise?

Quote   Quote: Originally Posted by StalkeR View Post
Hello there. You can find more infor for that error here: Stop 0x124 - what it means and what to try
Please confirm and note the steps you have taken.

Your idle temps are fine.
I have done all the steps from that page!
Downloaded all the lastest drivers.
Updated bios.
Tested Graphics with furmark.
Tested cpu with prime95.
Tested ram and HDDs with windows.

As said above I've replaced the graphics and ram and I'm still getting the problem.
Only thing that seems to help really is underclocking it but that's not a 100% fix!
My System SpecsSystem Spec
02 Jan 2012   #15
firsttimebuild

windows 7 32-64
 
 

Update: I've started getting the error "display drivers have stop responding" this happens before I blue screen 90% of the time now I had the 11.12 AMD drivers which were the lastest I've also gone back to 11.11, 11.10, 11.9, 11.8, 11.7, 11.6, 11.5. But I still get the error message that my display driver is not responding! I think this has something to do with what I'm experiencing! Please help this problem is still not solved!

If any body would like my to post more recent DMP files just ask!
My System SpecsSystem Spec
02 Jan 2012   #16
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Post your DMP files.

Did you delete the old drivers before installing the new ones?

How to Clean Left Over Driver Files with Driver Sweeper
My System SpecsSystem Spec
02 Jan 2012   #17
carwiz

Windows 7 Pro-x64
 
 

Post your system specs too.

What power supply are you using? (Make and model specific.)
My System SpecsSystem Spec
03 Jan 2012   #18
carwiz

Windows 7 Pro-x64
 
 

Here's what I get decoding the MCI status register:

1011 0110 0100 1010 1010 0000 0000 0000 . 0100 0001 0000 0000 0000 0001 0011 0101
_________________________________________________________MCA Error Code-----
______________________________________Machine Specific-----

From this, it appears to be a cache bus error. ??? Maybe caused by FSB timing. I would seriously be looking at the power supply. If possible, swap a known good unit. Or at least return the BIOS to all default voltage settings and monitor CPU voltages.
My System SpecsSystem Spec
03 Jan 2012   #19
firsttimebuild

windows 7 32-64
 
 

Quote   Quote: Originally Posted by carwiz View Post
Post your system specs too.

What power supply are you using? (Make and model specific.)

I've only recently upgraded my power supply from a 620W to a Corsair 750TX - 750W.
Had this PSU for little over a month, bought brand new.

I only uninstalled the drivers! I did not use driver sweeper. Do you think that using driver sweeper would make a difference or is it just more hassle? If you think it'll make a difference I'll uninstall all drivers and use driver sweeper in safe mode to delete the remnants before I reinstall.

Let me know guys!
My System SpecsSystem Spec
03 Jan 2012   #20
firsttimebuild

windows 7 32-64
 
 

Here are my lastest DMP files all from the same night.
My System SpecsSystem Spec
Reply

 BSOD With 0x00000124




Thread Tools




Similar help and support threads
Thread Forum
BSOD with 0x00000124
Halp! I have a recurrent BSOD, and it hits when my PC is just on the desktop doing nothing really. I think something might be up with the CPU but I've stress tested with Prime95 (ran ok for c.5 hours), and the temps are fine according to Speedfan. I can't seem to get the Windows debugger to...
BSOD Help and Support
Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)
I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c. Recently uninstalled all video drivers and re installed. The bsods sometimes go...
BSOD Help and Support
BSOD 0x00000124
Hello! BSOD 0x00000124 occurs to me only when I play Portal 2 and Saints Row: The Third (I have both games on Steam), a totally random, once in a menu or after 5min of playing, sometimes after an hour ... configuration: Mainboard: Asrock P57 Pro3, BIOS ver. 1.90 CPU: Intel i5-2500K CPU ...
BSOD Help and Support
BSOD 0x00000124
Hello this is my first post so dont judge if i miss something :p. (thanks :)) My OS is Windows 7 Ultimate 32bit. My friend installed them because he has them. Mostly BSOD happens playing games or when i give my computer a lot of pressure. While trying to get the report that i attached my...
BSOD Help and Support
Help me BSOD 0x00000124
i have Asus A42jc Laptop with spec:Intel i5-430M,2GB RAM,Nvidia 310M 1GB DDR3 64bit,Windows 7 ultimate 32bit every time i play game that need high requirement like GTA IV,PES2010,POP Forgotten Sands,ETC i always get BSOD with stop code 0x00000124..... the period is random,sometimes i get BSOD...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:10.
Twitter Facebook Google+