Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD With 0x00000124

05 Jan 2012   #31
firsttimebuild

windows 7 32-64
 
 

Ok I've added my system spec.
As I've said above when I go into the bios to reset my hardware to factory settings.
I go to default settings, but when I boot up into windows it says on CPU-Z and Core temp that my cpu is only running at 803Mhz When my stock clock speed should be 3.2Ghz I don't know why this is happening.

I did the memtest in total 4 times 3 times to 100% then over night to 1300%.
0 errors found.


My System SpecsSystem Spec
.
05 Jan 2012   #32
Devilz

Windows 8.1 - 64 Bit
 
 

Here is the list of CPU's supported by your motherboard.

ASRock > Products > N68C-S UCC > CPU Support List

By looking at cpuz screenshot you have posted, its look your cpu is not supported with this motherboard cause you are running at 3GHz (underclock) whereas by looking at the cpu support list, maximum speed this motherboard can support is 2.8 GHz
My System SpecsSystem Spec
05 Jan 2012   #33
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Is 'Cool and Quiet' enabled?

This is a CPU function that lets your CPU run at lower frequency and voltage when you system is at idle or low load, it will ramp up when your system is under a high load.

Devilz has a good point.
From your motherboard site:
Quote:
Support up to 95W Socket AM3 processors
From the AMD site:
Quote:
HDT90ZFBK6DGR AMD Phenom™ II X6 Black 1090T 3200 125 W
Check for BIOS update related to CPU compatibility.
You may need to get a different motherboard.
My System SpecsSystem Spec
.

05 Jan 2012   #34
firsttimebuild

windows 7 32-64
 
 

But I don't understand? On the box it says supports phenom II and six core ready.
It worked perfectly for 5 months before this error started occurring. :S
My System SpecsSystem Spec
05 Jan 2012   #35
Devilz

Windows 8.1 - 64 Bit
 
 

Its definitely hardware issue, you have mentioned in your previous posts you have changed your graphic card and ram so we are only left with cpu
My System SpecsSystem Spec
05 Jan 2012   #36
firsttimebuild

windows 7 32-64
 
 

So do you think there something wrong with the cpu? Or just that its not compatible with the motherboard? I was about to upgrade to 16GB DDR3 if you think it's the motherboard I'll invest into that first.
My System SpecsSystem Spec
05 Jan 2012   #37
Devilz

Windows 8.1 - 64 Bit
 
 

Its look like I've to deliver bad news mate. Yes definitely, its compatibility issue. Your CPU is designed to run at 3.2GHz (stock speed) and your motherboard can support CPU's up to 2.8GHz (maximum).

ASRock > Products > N68C-S UCC > CPU Support List

If you look here, your MB can support 3 phenom II x6 CPU's, 2.6GHz, 2.7GHz & 2.8GHz respectively and these all run @ 95W. And if you look here

AMD Phenom

The CPU you got is 3.2GHz and needs 125W to operate.

Hope this will help
My System SpecsSystem Spec
05 Jan 2012   #38
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Your motherboard supports up to 95w CPU. The Phenom II X6 1055T, 1075T, 1090T and 1100T are 125w.

Your motherboard supports the Phenom II X6 1065T and 1045T only.

If you want to keep the Phenom II X6 1090T you should get a new motherboard. Be sure to check the CPU compatibility list before buying.
My System SpecsSystem Spec
07 Jan 2012   #39
firsttimebuild

windows 7 32-64
 
 

Order a new motherboard soon! Hopefully this will completely fix this problem!
One thing now though I can't decide between these 2 motherboards I was wondering if any 1 could help me decide between them.

Gigabyte 990FXA-UD3 SKT-AM3+

OR

Asrock 890FX Deluxe5 AM3+
My System SpecsSystem Spec
08 Jan 2012   #40
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Both are good choices.

Go to the motherboard support forum for each and check if they are having any serious issues.
There will always be issues, some caused by the motherboard and some not.

If there is a reoccurring issue, you might want to research it further.
My System SpecsSystem Spec
Reply

 BSOD With 0x00000124




Thread Tools




Similar help and support threads
Thread Forum
BSOD with 0x00000124
Halp! I have a recurrent BSOD, and it hits when my PC is just on the desktop doing nothing really. I think something might be up with the CPU but I've stress tested with Prime95 (ran ok for c.5 hours), and the temps are fine according to Speedfan. I can't seem to get the Windows debugger to...
BSOD Help and Support
Random BSOD 0x00000124 Hall.dll (Bsod is distorted/static sound)
I have been getting a ton of bsods I have re installed video drivers, updated and reinstalled windows 8. Did countless hardware test(Video ram, check memory, Cpu test) all passed temperatures stay around 25-35 c. Recently uninstalled all video drivers and re installed. The bsods sometimes go...
BSOD Help and Support
BSOD 0x00000124
Hello! BSOD 0x00000124 occurs to me only when I play Portal 2 and Saints Row: The Third (I have both games on Steam), a totally random, once in a menu or after 5min of playing, sometimes after an hour ... configuration: Mainboard: Asrock P57 Pro3, BIOS ver. 1.90 CPU: Intel i5-2500K CPU ...
BSOD Help and Support
BSOD 0x00000124
Hello this is my first post so dont judge if i miss something :p. (thanks :)) My OS is Windows 7 Ultimate 32bit. My friend installed them because he has them. Mostly BSOD happens playing games or when i give my computer a lot of pressure. While trying to get the report that i attached my...
BSOD Help and Support
Help me BSOD 0x00000124
i have Asus A42jc Laptop with spec:Intel i5-430M,2GB RAM,Nvidia 310M 1GB DDR3 64bit,Windows 7 ultimate 32bit every time i play game that need high requirement like GTA IV,PES2010,POP Forgotten Sands,ETC i always get BSOD with stop code 0x00000124..... the period is random,sometimes i get BSOD...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:15.
Twitter Facebook Google+