Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Memory_Management BSOD

29 Dec 2011   #11
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
Surprisingly, I got errors in Memtest86+ with the two modules (2x4GB) installed in my RAM slots. Does this direct to the problem right away?
What are the errors and how many?


My System SpecsSystem Spec
.
29 Dec 2011   #12
kevindd992002

Windows 7 Ultimate x6
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
Surprisingly, I got errors in Memtest86+ with the two modules (2x4GB) installed in my RAM slots. Does this direct to the problem right away?
What are the errors and how many?
Oops I forgot to take a picture of them but I remembered that there were 8 lines. I think they were all "Pass 5" and were numbered 0, 1, 2, 3, 4, 5 , 6, 7, 8.
My System SpecsSystem Spec
29 Dec 2011   #13
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
Surprisingly, I got errors in Memtest86+ with the two modules (2x4GB) installed in my RAM slots. Does this direct to the problem right away?
What are the errors and how many?
Oops I forgot to take a picture of them but I remembered that there were 8 lines. I think they were all "Pass 5" and were numbered 0, 1, 2, 3, 4, 5 , 6, 7, 8.
Probably is ram. Try one stick at a time.
My System SpecsSystem Spec
.

29 Dec 2011   #14
kevindd992002

Windows 7 Ultimate x6
 
 

Ok, will do. Problems with RAM slots are very rare, right?
My System SpecsSystem Spec
30 Dec 2011   #15
kevindd992002

Windows 7 Ultimate x6
 
 

I've run Memtest86+ 4.20 and found errors while testing the 2 modules simultaneously. Now I'm testing the modules individually. I'm done testing RAM1, 8 passes with no errors on slot 1 and 7 passes with no errors in slot 2. I'm currently testing RAM2 on slot 1.

I did notice some weird behavior though. When one module is installed, in slot 1, the CAS reported by Memtest86+ 4.2 is 9-9-9-27 and when one module is installed, in slot 2, it is 6-6-6-20. Why the difference?
My System SpecsSystem Spec
30 Dec 2011   #16
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
I've run Memtest86+ 4.20 and found errors while testing the 2 modules simultaneously. Now I'm testing the modules individually. I'm done testing RAM1, 8 passes with no errors on slot 1 and 7 passes with no errors in slot 2. I'm currently testing RAM2 on slot 1.

I did notice some weird behavior though. When one module is installed, in slot 1, the CAS reported by Memtest86+ 4.2 is 9-9-9-27 and when one module is installed, in slot 2, it is 6-6-6-20. Why the difference?
Ram slots (mobo) is less frequently the cause but I have seen it in abt 20% of the time.

The CAS may be showing a slight difference in voltage? Unsure.
My System SpecsSystem Spec
30 Dec 2011   #17
kevindd992002

Windows 7 Ultimate x6
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
I've run Memtest86+ 4.20 and found errors while testing the 2 modules simultaneously. Now I'm testing the modules individually. I'm done testing RAM1, 8 passes with no errors on slot 1 and 7 passes with no errors in slot 2. I'm currently testing RAM2 on slot 1.

I did notice some weird behavior though. When one module is installed, in slot 1, the CAS reported by Memtest86+ 4.2 is 9-9-9-27 and when one module is installed, in slot 2, it is 6-6-6-20. Why the difference?
Ram slots (mobo) is less frequently the cause but I have seen it in abt 20% of the time.

The CAS may be showing a slight difference in voltage? Unsure.
Weird. I have to try the other two slots (I have four) after this Memtest86+ test.

Is it also possible that each module will pass Memtest86+ for 7 passes individually but will not pass (with errors) when working together in dual channel mode? If that's the case, what is the possible cause and solution for that?
My System SpecsSystem Spec
30 Dec 2011   #18
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
I've run Memtest86+ 4.20 and found errors while testing the 2 modules simultaneously. Now I'm testing the modules individually. I'm done testing RAM1, 8 passes with no errors on slot 1 and 7 passes with no errors in slot 2. I'm currently testing RAM2 on slot 1.

I did notice some weird behavior though. When one module is installed, in slot 1, the CAS reported by Memtest86+ 4.2 is 9-9-9-27 and when one module is installed, in slot 2, it is 6-6-6-20. Why the difference?
Ram slots (mobo) is less frequently the cause but I have seen it in abt 20% of the time.

The CAS may be showing a slight difference in voltage? Unsure.
Weird. I have to try the other two slots (I have four) after this Memtest86+ test.

Is it also possible that each module will pass Memtest86+ for 7 passes individually but will not pass (with errors) when working together in dual channel mode? If that's the case, what is the possible cause and solution for that?
Definitely possible that individually they will pass, just as it is possible that they will fail when jointly they were fine.

Might mean a mobo slot, voltage, etc. Is all the ram from a single package?
My System SpecsSystem Spec
30 Dec 2011   #19
kevindd992002

Windows 7 Ultimate x6
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post

Ram slots (mobo) is less frequently the cause but I have seen it in abt 20% of the time.

The CAS may be showing a slight difference in voltage? Unsure.
Weird. I have to try the other two slots (I have four) after this Memtest86+ test.

Is it also possible that each module will pass Memtest86+ for 7 passes individually but will not pass (with errors) when working together in dual channel mode? If that's the case, what is the possible cause and solution for that?
Definitely possible that individually they will pass, just as it is possible that they will fail when jointly they were fine.

Might mean a mobo slot, voltage, etc. Is all the ram from a single package?
Yes, same package, it's a 2x4GB kit.

Now I'm getting a little bit worried. I hope this current test I'm having will fail because that will indicate that one of the sticks is indeed damaged. This is a brand new laptop that I bought from the US internationally (I'm from the Philippines) for crying out loud
My System SpecsSystem Spec
30 Dec 2011   #20
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post

Weird. I have to try the other two slots (I have four) after this Memtest86+ test.

Is it also possible that each module will pass Memtest86+ for 7 passes individually but will not pass (with errors) when working together in dual channel mode? If that's the case, what is the possible cause and solution for that?
Definitely possible that individually they will pass, just as it is possible that they will fail when jointly they were fine.

Might mean a mobo slot, voltage, etc. Is all the ram from a single package?
Yes, same package, it's a 2x4GB kit.

Now I'm getting a little bit worried. I hope this current test I'm having will fail because that will indicate that one of the sticks is indeed damaged. This is a brand new laptop that I bought from the US internationally (I'm from the Philippines) for crying out loud
Is it still under warranty?
My System SpecsSystem Spec
Reply

 Memory_Management BSOD




Thread Tools




Similar help and support threads
Thread Forum
Memory_management bsod
I have been getting bsod every couple of weeks. Can someone review these dumps and let me know what you think? Marc
BSOD Help and Support
BSOD Memory_Management
Age of system hardware is 7 days. Age of OS is 7 days. OS: Windows 7 x64 Spec: Core i7 950 12GB Corsair RAM Gigabyte GA X58A-UD3R (Rev 2, i think?) XFX HD 5670 1GB (ATI) Samsung Spinpoint 1TB HDD (sata)
BSOD Help and Support
BSOD memory_management
Hi all. Me and brother built this pc on saturday 24th july 2010. Its all installed correctly but i seem to get the BSOD every now and again. Sometimes happens 3 times in an hour, other times the comp runs for hours. Its a phenom II 1055 Radeon hd5850 Win 7 64bit 4GB pc3 1600MHZ 550w...
BSOD Help and Support
Memory_Management BSOD
Please help! Keep getting a memory_managemnt blue screen... Attached is my DMP File! Thanks, Jay
BSOD Help and Support
Memory_management bsod
I bought a new PC and installed Win7 x64 Professional. Ran fine for a while, turned it off at night and turned it on in the morning - crashed constantly and gave memory_management bsods (WhoCrashed reported ntoskrnl.exe as the culprit). After being unable to keep Windows stable, I made a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:07.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App