Multiple BSOD errors


  1. Posts : 11
    Windows 7 Ultimate x64
       #1

    Multiple BSOD errors


    Hi everyone ,
    It's been 4 months that I bought new hardware and I still have many bsod errors.
    I've tried many of suggetions in this forum but there isn't any result so far.
    IRQL_NOT_EQUAL
    Memory_Management
    PAGE_FAULT_IN_NON_PAGED_AREA
    ...and some others I can't remember.

    CPU : i3 2120
    Board: P8Z68-V PRO
    Ram: 2GB Kingston x 4 (KVR1333D3N9/2G)
    Graphic: OnBoard (1637MB)
    HDD: Maxtor 300GB (Windows Driver)/ WD Khaviar green 1TB
    Win 7 Ultimate 64-bit (Not orginal but, it was working fine on my old PC)
    Installation Date: Yesterday!
    I also have Win Vista SP1 64-bit Installed and It has the same BSOD errors
    (Not orginal)

    I've tested my PC with memtest86+ many times. I also bought new PSU and re-installed win for several times.

    By the way my mouse and kerboard (Logitech MK300) stop working suddenly some times. It's working fine after windows installation , It starts after 2 weaks and get worse by the time.
      My Computer


  2. Posts : 5,705
    Win7 x64 + x86
       #2

    Please check for Windows Updates. Your system has 56 after SP1 and most other systems have 65 or more.

    TechniSat CableStar HD2 drivers date from 2008, please update them.

    Western Digital drivers (most likely for an external hard drive) date from 2008, please uninstall these.

    If the above things don't stop the BSOD's, then try running Driver Verifier according to these instructions:
    Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

    So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

    If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:
    Code:
    Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Win7):
            HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
            HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
    More info on this at this link: http://support.microsoft.com/?kbid=244617&sd=RMVP
    BSOD BUGCHECK SUMMARY
    Code:
    
    Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\011212-42603-01.dmp]
    Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
    Debug session time: Wed Jan 11 16:56:28.987 2012 (UTC - 5:00)
    System Uptime: 0 days 2:29:04.986
    Probably caused by : win32k.sys ( win32k!xxxMsgWaitForMultipleObjects+108 )
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x50
    PROCESS_NAME:  csrss.exe
    FAILURE_BUCKET_ID:  X64_0x50_win32k!xxxMsgWaitForMultipleObjects+108
    Bugcheck code 00000050
    Arguments fffffa82`09d3f960 00000000`00000000 fffff800`02eedbcd 00000000`00000005
    ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      
      
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd
All times are GMT -5. The time now is 21:29.
Find Us