Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Random BSOD - Locale ID: 4105 BCCOde: 1000007e

29 Jan 2012   #1

Windows 7 x64 Professional
Random BSOD - Locale ID: 4105 BCCOde: 1000007e

I've had this issue over and over again and can't seem to solve it. I've taken my friends' advance and ran memory tests and checked the temperature of the CPU, but everytime I do something, it barely lasts more than 15 minutes and it'll reboot.

Here's the BSOD information:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.
Locale ID: 4105

Additional information about the problem:
BCCode: 1000007e
BCP2: FFFFF880016728A1
BCP3: FFFFF8800339A8E8
BCP4: FFFFF8800339A150
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:

I have a Windows 7 Professional X64 machine. This was built by a friend of mine and has a bit of knowledge in computers.

Running on an OEM version of Windows Professional x64. The hardware was all purchased around October 2010.

My System SpecsSystem Spec
29 Jan 2012   #2

Win 8 Release candidate 8400


The pre 2009 version of this driver is a known bsod cause.
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (notbefore).

If the above doesnt stop the crashes run these two below.

These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.
If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+

2-Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Using Driver Verifier to identify issues with Windows drivers for advanced users
My System SpecsSystem Spec
29 Jan 2012   #3

Windows 7 x64 Professional
BSOD no more!


Thanks for the info. The Asacpi.sys update seems to have solved the issue. It used to crash a lot when I was coming to my RAID drives, but now it appears that it is working (as much as I think it is).

Thanks for the help!

My System SpecsSystem Spec

30 Jan 2012   #4

Win 8 Release candidate 8400

Quote   Quote: Originally Posted by gotenks168 View Post

Thanks for the info. The Asacpi.sys update seems to have solved the issue. It used to crash a lot when I was coming to my RAID drives, but now it appears that it is working (as much as I think it is).

Thanks for the help!


My pleasure and good luck
My System SpecsSystem Spec

 Random BSOD - Locale ID: 4105 BCCOde: 1000007e

Thread Tools

Similar help and support threads
Thread Forum
BSOD at random, locale ID 4105, BCCode 3b
Recently I'e been getting BSODs at random intervals: sometimes a few hours apart, sometimes maybe days. At first, I thought this was due to something wrong with my Flash Player, as I noticed a pattern in YouTube videos loading but not playing, which was followed by the BSODs. This prompted me to...
BSOD Help and Support
random BSOD, BCCode: 1000007e
Hi there, Need help with this random blue screen please. I suspect it happens when PC goes to sleep (it should after 30 minutes of being inactive) but not sure. When I start the computer after crash I get the following: Problem signature: Problem Event Name: BlueScreen OS Version: ...
BSOD Help and Support
Random BSOD - Locale ID 4105?
Hi all, I've been getting what seems to me as very random BSOD's (gaming, idling, videos). It started a couple months back and I googled the problem and uninstalled some programs and it went away for a while.. but has recently reappeared. :( Browsing the forums, I'm just not sure if my...
BSOD Help and Support
Random BSOD BCCode: 1000007e
Hi, I just got a random BSOD while surfing the internet and i dont know the reason of it Can you guys please help me ? I already read through the instructions which you guys provided. My system specs: OS: Windows 7 Home Premium 64Bit CPU: AMD Phenom II X4 965 Processor 3.41 GHz...
BSOD Help and Support
Repeated random BSOD; how would I stop it, Locale ID: 4105 BCCode: 19
Okay, so I got my computer for Christmas, and it started blue screening me the day after, and than it would do it at random, with the same problem. Than it stopped for a month or two, and it started again, after it stopped that time for a little, my computer crashed and I needed the motherboard and...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:42.
Twitter Facebook