BSOD on data transfer, I think


  1. oreagan60
    Posts : 7
    Windows 7 Ultimate x64
       New #1

    BSOD on data transfer, I think


    I'm getting a recurring BSOD on my new media PC and can't figure out the source. I've noticed it coincides with data transfer, once or twice when I left it downloading something big overnight and today twice when copying large chunks from the 3-HDD RAID to an external drive. I've considered that it might be the RAM, but running a memory diagnostic from a thumb drive (admittedly not for more than 1.5 passes) didn't turn up anything. Prime95 used to also crash to BSOD on super-intense memory tests, but that was when I experimented with a light overclock before giving up on that for now.

    System in question:
    Win7 x64 Ultimate
    ASRock Pro3-M mATX Z68 motherboard
    i5 2500K processor, no overclock (3.3ghz)
    Corsair 8GB (2x4GB) DDR3 PC3-12800 RAM
    Silverstone 600W PSU
    Seagate Momentus XT 750GB hard drive (system disk)
    RAID of 3 Barracuda XT 3TB drives

    Thanks for any suggestions! Running out of patience with this thing.
    Last edited by oreagan60; 01 Feb 2012 at 16:05. Reason: Add OS info
      My Computer
    Quote Quote

  3. mgorman87
    Posts : 1,782
    Windows 7 Home Premium 64bit
       New #2

    Update your USB drivers from the Asrock site
    ASRock > Products > Motherboard > Z68 Pro3-M > Download

    Code:
    athurx.sys   Wed Apr 20 06:07:45 2011 (4DAEB071)
    Update your TP-LINK USB Stick - 150Mbps Wireless N - Wireless - Products - Welcome to TP-LINK

    Also run a hard drive scan on your drives
    Hard drive scan usings SeaTools - http://www.seagate.com/ww/v/index.js...00dd04090aRCRD - Both long and short tests


    BSOD BUGCHECK SUMMARY
    Code:
    
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Wed Feb  1 15:22:18.852 2012 (UTC - 5:00)
System Uptime: 0 days 0:03:25.241
*** WARNING: Unable to verify timestamp for FNETTBOH_305.SYS
*** ERROR: Module load completed but symbols could not be loaded for FNETTBOH_305.SYS
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : FNETTBOH_305.SYS ( FNETTBOH_305+15a8 )
EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.
ERROR_CODE: (NTSTATUS) 0 - STATUS_WAIT_0
BUGCHECK_STR:  0x1E_0
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x1E_0_FNETTBOH_305+15a8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Wed Feb  1 15:17:55.606 2012 (UTC - 5:00)
System Uptime: 1 days 22:23:25.995
*** WARNING: Unable to verify timestamp for FNETTBOH_305.SYS
*** ERROR: Module load completed but symbols could not be loaded for FNETTBOH_305.SYS
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : FNETTBOH_305.SYS ( FNETTBOH_305+15a8 )
EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.
ERROR_CODE: (NTSTATUS) 0 - STATUS_WAIT_0
BUGCHECK_STR:  0x1E_0
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x1E_0_FNETTBOH_305+15a8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 24 23:50:59.622 2012 (UTC - 5:00)
System Uptime: 0 days 8:56:45.621
*** WARNING: Unable to verify timestamp for athurx.sys
*** ERROR: Module load completed but symbols could not be loaded for athurx.sys
Probably caused by : athurx.sys ( athurx+30be )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xD1_athurx+30be
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 24 04:00:44.950 2012 (UTC - 5:00)
System Uptime: 4 days 7:46:18.504
*** WARNING: Unable to verify timestamp for athurx.sys
*** ERROR: Module load completed but symbols could not be loaded for athurx.sys
Probably caused by : athurx.sys ( athurx+30be )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xD1_athurx+30be
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Jan 19 20:08:25.354 2012 (UTC - 5:00)
System Uptime: 1 days 3:35:25.353
*** WARNING: Unable to verify timestamp for athurx.sys
*** ERROR: Module load completed but symbols could not be loaded for athurx.sys
Probably caused by : athurx.sys ( athurx+91c8e )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
PROCESS_NAME:  System
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x7E
FAILURE_BUCKET_ID:  X64_0x7E_athurx+91c8e
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Jan  9 20:35:55.417 2012 (UTC - 5:00)
System Uptime: 0 days 0:02:33.400
Probably caused by : hardware
BUGCHECK_STR:  0x124_GenuineIntel
PROCESS_NAME:  prime95.exe
FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_CACHE
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Dec 25 19:50:37.917 2011 (UTC - 5:00)
System Uptime: 0 days 0:05:03.337
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+78c8 )
BUGCHECK_STR:  0x116
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x116_IMAGE_atikmpag.sys
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Dec 29 00:58:26.209 2011 (UTC - 5:00)
System Uptime: 0 days 5:42:44.411
*** WARNING: Unable to verify timestamp for athurx.sys
*** ERROR: Module load completed but symbols could not be loaded for athurx.sys
Probably caused by : athurx.sys ( athurx+30be )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  explorer.exe
FAILURE_BUCKET_ID:  X64_0xD1_athurx+30be
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      My Computer
    Quote Quote

  4. oreagan60
    Posts : 7
    Windows 7 Ultimate x64
    Thread Starter
       New #3

    Well, the drivers were all already up-to-date, I tried that when the problems first showed athurx.sys on a bsod screen. Since that TLINK wifi adapter has also not been staying connected consistently, I went ahead and ejected it. It's only been a few hours, but I've continued the large copying operation that spawned two bsods in a row this afternoon and all seems to be working okay. I'll run the hard drive tests later, but they didn't show anything a few weeks ago when I tried them.
    Pending another bsod, I guess I'll assume it was some kind of weird wifi adapter incompatibility and see if I can just get a different one. I'll update with further test results is the problem recurs. Otherwise, thanks for giving it a look over!
      My Computer
    Quote Quote

 

  Related Discussions
USB data transfer speeds
in Hardware & Devices

I am running Windows 7 Ultimate 64Bit with Service Pack 1. I have a P8Z77-V DELUXE M/B, i7-3770 CPU. All the USB drivers are the latest drivers and Windows itself is totally up to date. Yet, when I connect any USB device, I get extremely slow data transfers. I backed up some of my data to an...
i'm going abroad for a while with my laptop. i can't take my desktop pc, but i can take the hard drive which has 1.5 TB of data on it. my laptop top hard drive is only 750GB big so i bought a USB 3.0 to SATA cable so that i can you my hard drive when i'm away i plug my hard drive into my laptop it...
Dear Sir, Can i transfer my PC data to another PC through USB port? if yes so please give me procedure?
Hi guys, Comes Feb I'll be getting a new HDD and a new DVD-RW as my drives are 5 years old. They're still working but nothing lasts forever right? My HDD is partitioned to C: and D: for boot and storage. I'd like to do the same with the new HDD and transfer the data to it. How would I do it?...
USB Data Transfer BSOD
in BSOD Help and Support

I have read around the forums and found several people with this issue. However they were all OEM Computers, my computer is custom built. The problem I run into is large data transfer over USB. The transfer will run about 30min-1hr and then my computer will BSOD and restart. Any advice on possible...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 й Designer Media Ltd
All times are GMT -5. The time now is 23:32.
Find Us