Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Kernel-Power 41 18 Times Last 7 Days

02 Feb 2012   #11
boatracer

Windows 7 Entrpise
 
 

Thank you!


My System SpecsSystem Spec
.
20 Feb 2012   #12
boatracer

Windows 7 Entrpise
 
 

Attachment 199336

Attachment 199337


Kernal - Power 41 is back.

I've attached the latest reports for you review. Please let me know if something stands out.

Thank you!
My System SpecsSystem Spec
22 Feb 2012   #13
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problem Devices:
Code:
High Definition Audio Device	HDAUDIO\FUNC_01&VEN_1002&DEV_AA01&SUBSYS_00AA0100&REV_1002\5&B219905&0&0001	This device is disabled.
BlackBerry			USB\VID_0FCA&PID_8004&MI_00\7&DECD26&0&0000					The drivers for this device are not installed.
Do the following steps to check hardware.
  • Download and install the appropriate version of HWINFO: HWiNFO32 for 32-bit Windows 7 or HWiNFO64 for 64-bit Windows 7 to check hardware temperatures by running in sensor-only mode. Start logging the temperature through sensor-only mode when the computer first starts, and let it run during stress or until a crash occurs.

    Save the CSV file in a place you will remember, and then compress the CSV file to a zip file and upload to here for us to analyze by following the steps in Screenshots and Files - Upload and Post in Seven Forums.


  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory.


  • Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.


  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
    Once these steps have been followed, it is safe to remove and replace components within your computer.



1600 frequency memory is known to have problems with AMD processors, so setting it to 1333 would be better. You also have a lot of memory installed, and the BIOS regulates voltages for 4 GB or less in Auto mode.

Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

Also, go into your BIOS and post all Voltages (CPU, RAM, NB, IMC, etc.) and all RAM settings (timings, frequency, etc.)

Thanks to Dave76 for help learning RAM Stability
My System SpecsSystem Spec
.

Reply

 Kernel-Power 41 18 Times Last 7 Days




Thread Tools




Similar help and support threads
Thread Forum
Computer shuts down like power outtage, Kernel Power Error ID 41
Recently I installed a new game on my computer (Far Cry 3), and after a while playing it, my computer suddenly shut down, just like a power outtage (except the power was not out). After debating with friends, I went more towards a hardware problem rather than a software problem, so I thought...
BSOD Help and Support
BSOD at random times, sometimes Kernel-Power, sometimes atapi
BSOD seemingly occurs when nothing else is going on, but usually a few seconds after finishing work or closing an application (application varies). I'm uploading the zip file as recommended.
BSOD Help and Support
DELL E6530 Event 41, Kernel-Power on battery power
Hi, Am new here but long-time Windows uses since Win95. Currently have a DELL E6530 and it gave me a BSOD Event 41 Error while on batteries! Looking around Google and other forums, this transpires to be a PSU related problem, but it's a laptop, and was running on batteries at the time the BSOD...
BSOD Help and Support
BSOD at random times with description Kernel-Power ID 41
Yesterday was the first time in a while that i've gotten the BSOD but every couple of days my computer will completely freeze causing me to force restart and in the windows event viewer they are all being caused by Kernel-Power with an event ID of 41. I have included my dump files using the SF...
BSOD Help and Support
BSOD at random times, 2 times/day in the last 4 days
Hi, I have started getting BSODs twice a day at random moments on my computer in the last 4 days. I've tried to figure out the reason for the BSODs but I'm not sure. I often get the * Hardware failure * bsod. Now I know these can be caused by a number of things, so that is why I included with...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:13.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App