Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Gigabyte BSODing Me After Log In

27 Feb 2012   #1

Windows 7 Ultimate x64

Hello everyone and to start off, the title pretty much says everything.
I can use Safe Mode and Netwroking but when I normally sign in it BSOD's me
right after log in. If anyone has any soloutions please help. I remeber the lines of
error codes which was 0x0000007E (0xFFFFFFFC0000005, 0xFFFFF880068c7873, 0xFFF66688003362708, 0xFFFFF88003361030). It has BSODed me
5 times now, please help...........

Here are the files from the memory dump....

My System SpecsSystem Spec
27 Feb 2012   #2

Windows 7 Ultimate x64

Does anyone have any idea what is wrong? Come on, I need my computers.. :P
My System SpecsSystem Spec
27 Feb 2012   #3

Windows 7 Home Premium 64 Bit

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [D:\Kingston\BSODDmpFiles\TManTM\022712-28033-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02e5c000 PsLoadedModuleList = 0xfffff800`030a1e90
Debug session time: Mon Feb 27 05:19:28.919 2012 (UTC - 7:00)
System Uptime: 0 days 0:01:42.090
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
Unable to load image \SystemRoot\system32\DRIVERS\RTL8192u.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RTL8192u.sys
*** ERROR: Module load completed but symbols could not be loaded for RTL8192u.sys
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff880068c7b73, fffff880033617d8, fffff88003361030}

Probably caused by : RTL8192u.sys ( RTL8192u+56b73 )

Followup: MachineOwner

1: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff880068c7b73, The address that the exception occurred at
Arg3: fffff880033617d8, Exception Record Address
Arg4: fffff88003361030, Context Record Address

Debugging Details:

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

fffff880`068c7b73 8801            mov     byte ptr [rcx],al

EXCEPTION_RECORD:  fffff880033617d8 -- (.exr 0xfffff880033617d8)
ExceptionAddress: fffff880068c7b73 (RTL8192u+0x0000000000056b73)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 00000000004d5d28
Attempt to write to address 00000000004d5d28

CONTEXT:  fffff88003361030 -- (.cxr 0xfffff88003361030)
rax=fffffa8007f80000 rbx=0000000000000000 rcx=00000000004d5d28
rdx=fffff88002e8bd28 rsi=fffffa8009075000 rdi=0000000000000001
rip=fffff880068c7b73 rsp=fffff88003361a18 rbp=fffffa800a9aef48
 r8=0000000000000004  r9=fffff88003361a50 r10=0000000000000000
r11=00000000004d5d28 r12=00000000004d5d28 r13=0000000000000004
r14=fffffa800a9aef44 r15=0000000000000004
iopl=0         nv up ei pl nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010202
fffff880`068c7b73 8801            mov     byte ptr [rcx],al ds:002b:00000000`004d5d28=??
Resetting default scope





ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000001

EXCEPTION_PARAMETER2:  00000000004d5d28

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff8000310d0e8

fffff880`068c7b73 8801            mov     byte ptr [rcx],al


LAST_CONTROL_TRANSFER:  from fffff8800687660f to fffff880068c7b73

fffff880`03361a18 fffff880`0687660f : 00000000`00000000 00000000`c0000001 fffffa80`09b88b70 00000000`c0000001 : RTL8192u+0x56b73
fffff880`03361a20 00000000`00000000 : 00000000`c0000001 fffffa80`09b88b70 00000000`c0000001 fffff800`03061c00 : RTL8192u+0x560f


SYMBOL_NAME:  RTL8192u+56b73

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  RTL8192u.sys


STACK_COMMAND:  .cxr 0xfffff88003361030 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_RTL8192u+56b73

BUCKET_ID:  X64_0x7E_RTL8192u+56b73

Followup: MachineOwner

1: kd> lmvm RTL8192u
start             end                 module name
fffff880`06871000 fffff880`068fb000   RTL8192u T (no symbols)           
    Loaded symbol image file: RTL8192u.sys
    Image path: \SystemRoot\system32\DRIVERS\RTL8192u.sys
    Image name: RTL8192u.sys
    Timestamp:        Thu Sep 11 21:38:11 2008 (48C9E423)
    CheckSum:         0007A341
    ImageSize:        0008A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
The first thing to do is remove the offending driver:
RTL8192u	fffff880`06871000	fffff880`068fb000	Thu Sep 11 21:38:11 2008 (48c9e423)	0007a341	None	RTL8192u.sys
Actually, seeing that it is a USB wireless network adapter; remove it from the system. You are using a USB wireless network adapter that has Vista drivers, and this is a recipe for blue screen crashes. We see this a lot on these forums.

If that does not work, run Disk Check with both boxes checked. Schedule it to run on next restart. Restart the computer and let it run.
My System SpecsSystem Spec

28 Feb 2012   #4

Windows 7 Ultimate x64

Yea, I saw this the other day. What I decided to do was a system restore and when I saw the WUA-140 Adapter I knew it was the case. Thanks for your help though it is appreciated!
My System SpecsSystem Spec
28 Feb 2012   #5

Windows 7 Home Premium 64 Bit

You're welcome. Glad you found the solution. :)
My System SpecsSystem Spec

 Gigabyte BSODing Me After Log In

Thread Tools

Similar help and support threads
Thread Forum
Gigabyte Radeon HD 7870 OC vs Gigabyte GeForce GTX 760 OC
Hey guys! Help me out in jumping down on a final decision.. Now let me give you some info and specs about my Rig! - i5 4670k - ASRock Fatal1ty H87 Performance (CrossFireX Ready) SLI not supported - 4GB G.Skill (will upgrade later) - Cooler Master GX 550w - Samsung LCD Monitor (1440x900...
Graphic Cards
USB2.0 HD Transfer over Gigabyte Network to Gigabyte NAS
I have a Western Digital 1 TB USB 2.0 that I have connected to a computer that has Gigabyte connection to my NAS which can handle Gigabyte speeds. I am only getting 30.1MB/s. Is there any settings I can do to windows so that it can send faster? I have Windows 7 Ultimate 64-Bit.
Network & Sharing
Keeps on BSODing >.<
Okay, i've played a game called Bandmaster. It uses X-trap to which one of it my computer detects as a malware but its not. Its the first reason why my computer keeps on BSODing. So I decided to delete it along with its drivers. But my computer still keeps on BSODing. So I too deleted all other...
BSOD Help and Support
Computer keeps bsoding.
ok heres the story. about a month ago i was getting bsod's when i went idle, and once while i was on the computer. i posted details here " Computer keeps restarting - General-Motherboard - Motherboards-Memory " i then reformatted and no bsod's for weeks. thought my oss install was messed up...
BSOD Help and Support
Ok first time i bsod'd it was page fault in a non paged area. I havnt had this since and i did a ram test and nothing came up. Then i got BAD_POOL_HEADER. That could mean anything. Just 10 minutes ago I got IRQL_NOT_LESS_OR_EQUAL. Its getting to the point i wanna go back to XP. I love windows 7 and...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App