Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Playing Skyrim - And During Other Random Events

01 Mar 2012   #11

Windows 7 64bit

Any luck ;/ ?

My System SpecsSystem Spec
01 Mar 2012   #12

Windows 7 Home Premium 64 Bit


Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [D:\Kingston\BSODDmpFiles\Mouzi\030212-9157-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02e4c000 PsLoadedModuleList = 0xfffff800`03091670
Debug session time: Thu Mar  1 08:58:41.348 2012 (UTC - 7:00)
System Uptime: 0 days 1:40:19.581
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa80194097e8, 0, fffff80002e9942b, 2}

Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiDeleteAddressesInWorkingSet+27f )

Followup: MachineOwner

1: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: fffffa80194097e8, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002e9942b, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000002, (reserved)

Debugging Details:

Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030fb100

fffff800`02e9942b 488b4128        mov     rax,qword ptr [rcx+28h]







TRAP_FRAME:  fffff88009039d60 -- (.trap 0xfffff88009039d60)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000058000000000 rbx=0000000000000000 rcx=fffffa80194097c0
rdx=0000000049b31009 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002e9942b rsp=fffff88009039ef0 rbp=fffff700011403a0
 r8=fffffa80072b4d78  r9=0000000000000000 r10=0000000000014a1f
r11=fffff70001080000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
fffff800`02e9942b 488b4128        mov     rax,qword ptr [rcx+28h] ds:7180:fffffa80`194097e8=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002e733f0 to fffff80002ec8c40

fffff880`09039bf8 fffff800`02e733f0 : 00000000`00000050 fffffa80`194097e8 00000000`00000000 fffff880`09039d60 : nt!KeBugCheckEx
fffff880`09039c00 fffff800`02ec6d6e : 00000000`00000000 fffffa80`194097e8 00000000`49b02000 7e300008`6add4867 : nt! ?? ::FNODOBFM::`string'+0x447c6
fffff880`09039d60 fffff800`02e9942b : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`09039ef0 fffff800`02e9a596 : fffffa80`072b49e0 fffffa80`00000006 fffff880`00014a1f fffff800`00000006 : nt!MiDeleteAddressesInWorkingSet+0x27f
fffff880`0903a7a0 fffff800`0319eb1a : fffff8a0`07a00060 fffff880`0903aae0 00000000`00000000 fffffa80`08e5d7c0 : nt!MmCleanProcessAddressSpace+0x96
fffff880`0903a7f0 fffff800`0318209d : 00000000`c0000005 00000000`c0000001 00000000`fff86000 fffffa80`07286b60 : nt!PspExitThread+0x56a
fffff880`0903a8f0 fffff800`02ebc3fa : 00000000`00000100 fffffa80`08e5d880 00000000`00000001 fffff800`02ece13d : nt!PsExitSpecialApc+0x1d
fffff880`0903a920 fffff800`02ebc740 : 00000000`00000246 fffff880`0903a9a0 fffff800`03182010 00000000`00000001 : nt!KiDeliverApc+0x2ca
fffff880`0903a9a0 fffff800`02ec7f77 : fffffa80`08e5d7c0 00000000`00000410 00000000`00000000 fffffa80`076974f0 : nt!KiInitiateUserApc+0x70
fffff880`0903aae0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceExit+0x9c


fffff800`02e9942b 488b4128        mov     rax,qword ptr [rcx+28h]


SYMBOL_NAME:  nt!MiDeleteAddressesInWorkingSet+27f

FOLLOWUP_NAME:  MachineOwner



IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x50_nt!MiDeleteAddressesInWorkingSet+27f

BUCKET_ID:  X64_0x50_nt!MiDeleteAddressesInWorkingSet+27f

Followup: MachineOwner
Happened while playing Skyrim. Possible causes are Memory problems... Graphics card memory problems... BIOS... Corrupted hard disk file system... Corrupted System Files... Missing Windows Updates... Drivers...
Thanks to Dave76 for help understanding possible causes.

Run through the following steps:
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. Run Driver Verifier

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    Thanks to zigzag3143 for contributing to the Verifier steps.
    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.
My System SpecsSystem Spec
01 Mar 2012   #13

Windows 7 64bit

So it could be faulty HDD? or Faulty Ram?
My System SpecsSystem Spec

01 Mar 2012   #14

Windows 7 Home Premium 64 Bit

Nothing points to a hard drive. That is just one of the possibilities of that type of crash. The main two likely culprits of the memory corruption being blamed as the probable cause are faulty RAM or a driver that is accessing RAM in a way it should not. That is why the two steps were outlined in my post for you to follow.

Disabling any overclocking is requested to remove that as a possible cause of instability.
My System SpecsSystem Spec
01 Mar 2012   #15

Windows 7 64bit

Yeah I don't overclock at all, I'll be really sad if it's my ram, I bought really nice Corsair ram

I'll give memtest a go and suss it out, if its a driver accessing it in a way it should not be whats the best way to determine which driver?
My System SpecsSystem Spec
01 Mar 2012   #16

Windows 7 Home Premium 64 Bit

The steps to run Verifier will root out which driver. By turning Verifier for all non-Microsoft drivers, your system will be forced into a state that causes driver conflicts to become apparent through blue screen crashes. That way, any crash reports generated will point to driver conflicts, and we can analyze them to determine which drivers are conflicting.
My System SpecsSystem Spec
01 Mar 2012   #17

Windows 7 64bit

Yeah i have that on atm for all non windows related drivers. so next BSOD hopefully can narrow it down i'll run memtest and get back to you.

thanks so much for your help.
My System SpecsSystem Spec
01 Mar 2012   #18

Win 8 Release candidate 8400

Might also want to check with Skyrim's developers as it appears there are a lot of issues with it in win 7
My System SpecsSystem Spec
22 Mar 2012   #19

Windows 7 Home Premium 64 Bit

Any luck with Verifier? Did you have any more crashes to analyze?
My System SpecsSystem Spec

 BSOD Playing Skyrim - And During Other Random Events

Thread Tools

Similar help and support threads
Thread Forum
BSOD playing skyrim
playing skyrim then screen will black out or white out before BSOD thought it was drivers so I removed and reinstalled still same issues. any help will be much appreciated!
BSOD Help and Support
Random BSOD events.
My pc is crashing on regular basis, aprox. 3-4 times a day, even more on a bad day. It will happen at random times, like when gaming, or sometimes when I'm on youtube, or even writing on MSWord!
BSOD Help and Support
BSOD playing Skyrim
I have recently started playing Skyrim, and have run into two BSOD so far. It happens seemingly randomly while playing. I am also using a lot of mods for the game; not sure if that's important. Can anyone help me out?
BSOD Help and Support
BSODs on new build at random and while playing Skyrim
I just finished my new build a few days ago and it was running great until yesterday with virtu mvp. Around the time the BSODs started I had installed itunes as well as some windows updates for the integrated intel hd graphics. Doing a system restore seemed to resolve the issue as skyrim ran ok...
BSOD Help and Support
Playing Skyrim,Now getting random BSOD (Serious crashes)
Hello. So i have my pc for about 7-9 Months now ,it ran fine and didnt really have problems with it.I have been playing a game (Skyrim) for 2 weeks now the 1st week it ran very smoothly and my computer never crashed but this changed the 2nd week,now when i start the game i get BSOD after playing...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:25.
Twitter Facebook Google+