BSOD from ntoskrnl.exe, multiple errors


  1. Posts : 4
    Windows 7 Home Premium x64
       #1

    BSOD from ntoskrnl.exe, multiple errors


    Hey guys, first time posting here but I found a lot of good information in my BSOD research so figured I should go ahead and make a thread.

    Computer is a few years old, a home build, running Windows 7 Home Premium x64. Haven't really had too many problems other than the occasional BSOD or random restart, but it's gotten a lot worse lately so I wanna get to the bottom of it.

    The two errors I've gotten are Memory Management and System Service Exception, both seem to be linked to the ntoskrnl.exe file. I also ran the System File Checker and got the following error reported: "Cannot repair member file [l:24{12}]"kerberos.dll" of Microsoft-Windows-Security-Kerberos". Lastly I ran the windows memory diagnostic and it detected several hardware errors.

    My conclusion from all this and what I've read so far is I will probably have to do at least one of three things:

    1)A system restore to a couple weeks ago
    2)Repair the system/OS with my Win7 disc
    3)Replace the RAM

    Wanted to post here before I try any of those though. Whew ok sorry to be long winded but wanted to provide as much info as possible.
      My Computer


  2. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #2

    Lastly I ran the windows memory diagnostic and it detected several hardware errors.
    This explains your issue, to further confirm that run a full RAM Test with Memtest86+
    RAM - Test with Memtest86+

    If errors are detected you should replace your RAM modules.
      My Computer


  3. Posts : 4
    Windows 7 Home Premium x64
    Thread Starter
       #3

    yowanvista said:
    Lastly I ran the windows memory diagnostic and it detected several hardware errors.
    This explains your issue, to further confirm that run a full RAM Test with Memtest86+
    RAM - Test with Memtest86+

    If errors are detected you should replace your RAM modules.
    Edit: Aaaaand it just crashed again as I was typing a reply to this lol. Memory management again, linked to the file LUsbFilt.Sys, which is a logitech driver apparently.

    Anyway, I forgot to mention that I did already run Memtest86, it got some 24 errors before freezing on me and I just had to exit out ha. So you think bad ram could be the cause of both BSOD ntoskrnl errors?
      My Computer


  4. Posts : 4
    Windows 7 Home Premium x64
    Thread Starter
       #4

    So, memory errors in both windows diagnostic and memtest86, should I just replace my RAM right away and hope the problem is resolved?
      My Computer


  5. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #5

    Pubbin said:
    So, memory errors in both windows diagnostic and memtest86, should I just replace my RAM right away and hope the problem is resolved?
    Yes, that confirms the RAM problem. Replace your RAM modules.
      My Computer


  6. Posts : 4
    Windows 7 Home Premium x64
    Thread Starter
       #6

    Alright thanks man, I'll do that then. Hopefully I don't have to make a new thread
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:14.
Find Us