Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Unable to start a DCom server error

28 Mar 2012   #11

Windows 7 Ultimate 32 bit

bumping for Writhziden's attention

My System SpecsSystem Spec
28 Mar 2012   #12

Windows 7 Home Premium 64 Bit

I would recommend Troubleshoot Application Conflicts by Performing a Clean Startup and only removing Toshiba based startup items and services items.

It appears that the Toshiba Utility Support Driver is tied to a number of Toshiba items. "TOSHIBA Flash Cards Support", "TOSHIBA HW setup", and "TOSHIBA Supervisor Password" Utilities all are included.
My System SpecsSystem Spec

 Unable to start a DCom server error

Thread Tools

Similar help and support threads
Thread Forum
Event Viewer DCOM Error 10010
Hello there, i'm using Windows 7 64 bit Home edition, on 4 computers atm , noticed at event viewer these messages Below, nothing important everything works fine on all computers i'm just wondering what is this, really can't understand so would like some help, if it's possible to explain me what is...
General Discussion
Homegroup not working, server unable to start smb1/2 issue
Hi after cloning a disk with bad sectors (having fixed them all) Boy was I lucky! I have run into an unusual issue. Everyting works great except homegroup. I can't leave it or see the password. Server in services is not started and when I try and start it, I get a dependancy error . Checking the...
Network & Sharing
Many startup repairs, DCOM server error, system hang on shutdown, etc
Hi All, I have an HPE 520 NL, x64 desktop, windows 7 home premium SP1. I have had many intermittent startup problems, with some elements hanging at shut down. I'm not well enought versed in this to figure it all out myself -- too computer illterate. Everything from DCOM servor error 10010, to...
General Discussion
DCOM Service Disabled - Windows wont start in any mode!
Hi My windows 7 has DCOM Service Disabled - Windows wont start in any mode! Ive tried Safemode, safemode command prompt etc and I just get a black screen. I can access CMD.exe using repair mode from the installation disk but not sure how to change services control manager settings from...
General Discussion
Connectivity - Legacy vb6 dcom client / server application
I am new to this site and not sure if this where I should be... I am debugging connectivity with a legacy vb6 activex dcom application using windows 7 pro 32 bit as the client. The client has been running under 2000 and xp with no issues for years, and am now attempting to use windows 7 pro...
System Security
DCOM Error
Hello all, Here's my error: "The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout." Help?
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:21.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App