Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Multiple BSOD on new image pc, others are fine

29 Mar 2012   #1

7 64
Multiple BSOD on new image pc, others are fine

HI Guys,

We have 20 pcs that are all identicle

Asus P8z68 v Gen3 mboard
i7 2700k 3.4 proc
win 7 64 Ent
2 x 1tb hdd raid 0
1 x OCZ Vertex 3 SSD for caching
4 x 4gb corsair vengance ddr3 ram
Geforce 560ti phantom GFx card
Corsaid 850 psu

We have created a network image using Acronis which has so far been successfully installed on 4 of these machines. However, we have come to the 5th machine and as of last night it refused to power on. Then after 10-15 mins it came up and started to load windows but gave us a BSOD and everytime it restarted itself it would give us a different message. I have attached the logs for someone to look at to see if this is possibly a PSU issue or something else.

The machines have Windows 7 enterprise
office 2010
adobe reader x
IE 9
Visio Viewer

My System SpecsSystem Spec
30 Mar 2012   #2

Windows 7 Ultimate x64/Windows 8 Consumer Preview x64/Ubuntu 11.04

Test your RAM using Memtest86+. Let it run until 6-8 passes have completed or errors have been found.
RAM - Test with Memtest86+

Enable Driver Verifier. Enabling this should hopefully crash your system and then point to the faulty driver that is causing problems. However before you do, it is advised that you create a system restore point and backup first.
Driver Verifier - Enable and Disable

Update your NIC/ethernet drivers as well as any drivers related to your modem or Wi-Fi.
My System SpecsSystem Spec

 Multiple BSOD on new image pc, others are fine

Thread Tools

Similar help and support threads
Thread Forum
BSOD Error, Office Comp., Safe Mode is Fine, Multiple Errors
At my end here on this problem, our office admin came to me with this issue and I am about to pull my hair out. Here are the "Grab All" files from the tool that was available on the website here, dumps, sys. info, etc. If anyone out there can make sense of this, please let me know, thanks.
BSOD Help and Support
Months of system being fine, sudden multiple BSODs this morning
Howdy all! I was here in the past a while ago with getting semi-frequent BSODs on boot after the splash and login screen. The issue I found was a loose power connector. I snugged it in place, and then my system is fine for many months (maybe four or five). Now this morning, I had quite a few...
BSOD Help and Support
Image CD software doesn't work in Windows 7 was working fine in XP
i upgraded my os from xp to win 7 there some programs on my image files which are not running fine on Win 7 like counter strike condition zero please help
General Discussion
System Image - Multiple Drives Only Want to Image one of them
I currently operate a PC with 3 separate HDD. I have my windows 7 and all of my programs installed on a 500 GB HDD. I have all of my files saved to a 2 TB HDD and a 1 TB HDD. I want to do a system image of the 500 GB HDD that has the OS and programs installed on it, however, when I go through to...
Backup and Restore
installs fine, runs fine, reboots..not fine
hey guys so i finally decided to install win7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc) so i rebooted, same...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:08.
Twitter Facebook Google+