Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Problems ntoskrnl.exe+70540

04 Apr 2012   #21

Windows 7 Home Premium 64 Bit

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [D:\Kingston\BSODDmpFiles\corp25\040212-18049-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*
Executable search path is: 
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16917.amd64fre.win7_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02e5f000 PsLoadedModuleList = 0xfffff800`0309be70
Debug session time: Mon Apr  2 22:43:31.414 2012 (UTC - 6:00)
System Uptime: 0 days 6:27:24.320
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffff8000316e726, 0, 0, fffff80002efc032}

Probably caused by : ntkrnlmp.exe ( nt!RtlDispatchException+122 )

Followup: MachineOwner

5: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arg1: fffff8000316e726, memory referenced
Arg2: 0000000000000000, IRQL
Arg3: 0000000000000000, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002efc032, address which referenced memory

Debugging Details:

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800031060e0


fffff800`02efc032 410fb60c24      movzx   ecx,byte ptr [r12]





TRAP_FRAME:  fffff880033d17f0 -- (.trap 0xfffff880033d17f0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff800030edd00 rbx=0000000000000000 rcx=fffff8000316e770
rdx=fffff8000316e6cc rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002efc032 rsp=fffff880033d1980 rbp=fffff880033d2828
 r8=0000000000001fc0  r9=0000000000001fbf r10=fffff880033d2d00
r11=fffff880033d19c8 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
fffff800`02efc032 410fb60c24      movzx   ecx,byte ptr [r12] ds:c151:00000000`00000000=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002eceaa9 to fffff80002ecf540

fffff880`033d16a8 fffff800`02eceaa9 : 00000000`0000000a fffff800`0316e726 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx
fffff880`033d16b0 fffff800`02ecd720 : 00000000`00000000 00000000`0000005a 0002408e`00034900 0003f043`0002a00e : nt!KiBugCheckDispatch+0x69
fffff880`033d17f0 fffff800`02efc032 : fffff800`0316e726 fffff880`033d19c8 fffff880`033d2828 fffff800`02e5f000 : nt!KiPageFault+0x260
fffff880`033d1980 fffff800`02f093af : fffff880`033d2828 fffff880`033d2090 fffff880`00000000 00000000`00000000 : nt!RtlDispatchException+0x122
fffff880`033d2060 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchException+0x16f


fffff800`02efc032 410fb60c24      movzx   ecx,byte ptr [r12]


SYMBOL_NAME:  nt!RtlDispatchException+122

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


FAILURE_BUCKET_ID:  X64_0xA_VRF_nt!RtlDispatchException+122

BUCKET_ID:  X64_0xA_VRF_nt!RtlDispatchException+122

Followup: MachineOwner
Your last verifier enabled .dmp file you uploaded indicates hardware as a likely cause:
How many passes did you let Memtest86+ run? Also, since Memtest86+ is not foolproof, can you give us an idea of your RAM settings?
  • Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

My System SpecsSystem Spec
04 Apr 2012   #22

Windows 7 Ultimate x64

I've never overclocked the computer, it's running at stock. In terms of temperature it always run fairly cold.. I have Gpu-z installed and it never goes above 50 degrees even while gaming. I use vengeance

I just remember something though maybe this is related to the recent bsod, but A couple of weeks ago I accidently knocked my computer on it's side. It wasn't a big fall but maybe some parts are loose?
My System SpecsSystem Spec
04 Apr 2012   #23

Windows 7 Home Premium 64 Bit

Was it on at the time? Your hard disk can be damaged if it is spinning at the time of a fall...

Also, the tests above are not just to test temperature. They stress components to make sure they are working properly. The temperature monitoring is just to make sure during stressing the computer does not overheat.
My System SpecsSystem Spec

04 Apr 2012   #24

Windows 7 Ultimate x64

Quote   Quote: Originally Posted by writhziden View Post
Was it on at the time? Your hard disk can be damaged if it is spinning at the time of a fall...

Also, the tests above are not just to test temperature. They stress components to make sure they are working properly. The temperature monitoring is just to make sure during stressing the computer does not overheat.
Yes the computer was running. My Desktop is right next to my feet, I don't know how but I kicked it by accident. Could it be the hard disk? Because I think I recall after that incident there was a memory something error or something and it did a check on my d drive. I can't remember, I thought of it as insignificant.

I doubt a slight fall to the carpet would damage the ram or gpu will it?

Does any of the dump files point to the hard disk as a probable cause?
My System SpecsSystem Spec
04 Apr 2012   #25

Windows 7 Home Premium 64 Bit

The most recent points to hardware, which could include the hard disk. What type of hard disk do you have? We can recommend some manufacturer's diagnostic tests once we know the hard disk manufacturer. If you need help finding the manufacturer, just follow the and we can help you with the information those instructions provide. :)

You may also want to reseat your PCI cards and RAM. Sometimes a jarring fall can cause things to come out of slots a little.

Follow these steps to the best of your ability for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec

 BSOD Problems ntoskrnl.exe+70540

Thread Tools

Similar help and support threads
Thread Forum
BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)
Got my first blue screen of death tonight, had 2 firefox opened one watching youtube video another browsing internet. After bsod it restarted i login but just black screen with cursor, ctrl alt delete worked so i shut my computer down. Boot up normally after, check my minidump file, bsod cause...
BSOD Help and Support
Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)
Hey guys so I've been getting some random BSOD errors every few days or so. I usually leave my computer on when I am at work or sleep and either when I come home or wake up my computer is off. So I turn it on and it says that the computer didn't shut down properly when I start up. I downloaded...
BSOD Help and Support
BSOD NToskrnl.exe problems
Hi can you help? My wife is having random BSOD issues, I have downloaded the Bluescreen view software and it has identified the source of the problem I have copied the Bluescreen view files as .txt files that outline the problem and have attached them for you. It appears it has to do with the...
BSOD Help and Support
having problems with my laptop w/ BSOD - ntoskrnl.exe - please fix me
BSOD everytime i use bittorrent to download. please help me... im having this problem for a couple of times already... Dump File; 072811-26301-01.dmp Crash Time; 7/28/2011 10:38:35 PM Bug Check String; PFN_LIST_CORRUPT Bug Check Code; 0x0000004e Parameter 1; 00000000`00000007 Parameter 2;...
BSOD Help and Support
ntoskrnl.exe Problems?
A while ago i posted here about my problem (BSOD). Then people told me to re install windows 7. I did that but I'm still getting those BSOD's. But now i do have the minidump file's maybe someone can help me?
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:35.
Twitter Facebook Google+