Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD OS Version: 6.1.7601.

13 Apr 2012   #1

Windows 7 Ultimate 32bit
BSOD OS Version: 6.1.7601.

it usually goes blue screen when im working
it's a 32bit Win 7 Ultimate
i sent to the store for fixing and received a pre-installed on system
i dont really know other figures
please help me
and tell me if anything is needed
thank you very much

My System SpecsSystem Spec
13 Apr 2012   #2

Win 8 Release candidate 8400

These were related to memory corruption.

Typically caused by a bad block in the paging file or disk controller error. Please run a chkdsk first and then the two below.

Disk Check

These crashes were caused by memory corruption probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+

Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these

- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created. You did create a restore point didnt you?
Driver Verifier

Using Driver Verifier (Windows Drivers)
My System SpecsSystem Spec

 BSOD OS Version: 6.1.7601.

Thread Tools

Similar help and support threads
Thread Forum
BSOD OS Version: 6.1.7601. Locale ID: 1033
BSOD error -- please help Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601. Locale ID: 1033 Additional information about the problem: BCCode: 50 BCP1: FFFFF8A01096CBFC BCP2: 0000000000000000
BSOD Help and Support
BSOD OS Version 6.1.7601. Locale ID: 1033
Hello...pls I need help regarding this problem..I have tried startup repair, system recovery..still when I restart, laptop fails to go past through the windows logo..screen jst goes black..i have to force shutdown and now im using Safe Mode...pls help...thank you Problem signature: Problem...
BSOD Help and Support
BSOD Os version:6.1.7601. Issue
Hi guys I got this dump files and I need help knowing what is causing my computer to randomly trow a BSOD and reboot this happens like every 12 to 24 hrs usually when is idle. I just build a new computer and looks like some of my drivers are not happy I try reloading and updating some of them but...
BSOD Help and Support
BSOD OS Version: 6.1.7601.
Hi Guys, This morning I received a BSOD with the following specs: Problem signature Problem Event Name: BlueScreen OS Version: 6.1.7601. Locale ID: 1043 Extra information about the problem BCCode: 7f
BSOD Help and Support
BSOD Os version:6.1.7601.
x64 not original This happened last night, when I wake up, I saw the PC was restared, and found this report. I had problems last few days, I doubt problem is memory, but I dont know why, it is in qualified vendor list for my mb.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:11.
Twitter Facebook Google+