Problem Devices:
Code:
Universal Serial Bus (USB) Controller PCI\VEN_1B6F&DEV_7023&SUBSYS_50071458&REV_01\4&18803EC9&0&00E4 The drivers for this device are not installed.
Universal Serial Bus (USB) Controller PCI\VEN_1B6F&DEV_7023&SUBSYS_50071458&REV_01\4&1B0D22A2&0&00E5 The drivers for this device are not installed.
These are important to have installed, so please fill out your system specs so we may help find them. Use System Info - See Your System Specs to fill out your specs.
Is this the support site for your board: GIGABYTE - Motherboard - Socket 1155 - GA-P67X-UD3-B3 (rev. 1.0) ?
Make sure your Chipset and USB 3.0 drivers are installed from that site.
Security Software (this is just to make sure it is installed and working properly; nothing needs to be done with this information at this time):
Code:
msmpeng.exe c:\program files\microsoft security client\antimalware\msmpeng.exe 844 8 200 1380 15/04/2012 7:01 PM 3.0.8402.0 12.48 KB (12,784 bytes) 27/04/2011 5:21 PM
nissrv.exe c:\program files\microsoft security client\antimalware\nissrv.exe 864 8 200 1380 15/04/2012 7:01 PM 3.0.8402.0 281.52 KB (288,272 bytes) 27/04/2011 5:21 PM
msseces.exe c:\program files\microsoft security client\msseces.exe 2432 8 200 1380 15/04/2012 7:05 PM 2.1.1116.0 1.37 MB (1,436,736 bytes) 15/06/2011 2:35 PM
sbiectrl.exe c:\program files\sandboxie\sbiectrl.exe 2032 8 200 1380 15/04/2012 7:05 PM 3.68.0.0 653.27 KB (668,944 bytes) 10/04/2012 4:17 AM
sbiesvc.exe c:\program files\sandboxie\sbiesvc.exe 1108 8 200 1380 15/04/2012 7:01 PM 3.68.0.0 95.27 KB (97,552 bytes) 10/04/2012 4:17 AM
Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\Foosh\Windows_NT6_BSOD_jcgriff2\041512-6879-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17790.amd64fre.win7sp1_gdr.120305-1505
Machine Name:
Kernel base = 0xfffff800`02a57000 PsLoadedModuleList = 0xfffff800`02c9b650
Debug session time: Sun Apr 15 18:59:55.335 2012 (UTC - 6:00)
System Uptime: 0 days 1:34:02.537
Loading Kernel Symbols
...............................................................
................................................................
...................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {403, fffff6800002b6e8, 9ec0000001919867, fffff6a00002b6e8}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+3266c )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000000403, The subtype of the bugcheck.
Arg2: fffff6800002b6e8
Arg3: 9ec0000001919867
Arg4: fffff6a00002b6e8
Debugging Details:
------------------
BUGCHECK_STR: 0x1a_403
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: SABnzbd.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80002a7bc56 to fffff80002ad3c80
STACK_TEXT:
fffff880`08dfb668 fffff800`02a7bc56 : 00000000`0000001a 00000000`00000403 fffff680`0002b6e8 9ec00000`01919867 : nt!KeBugCheckEx
fffff880`08dfb670 fffff800`02b05017 : 00000000`00000000 fffff680`0002ba58 fffffa80`07cd7b30 fffffa80`00000002 : nt! ?? ::FNODOBFM::`string'+0x3266c
fffff880`08dfb820 fffff800`02ac04bf : fffffa80`00000000 00000000`0574bfff 00000000`00000000 00000000`00000000 : nt!MiDeleteVirtualAddresses+0x41f
fffff880`08dfb9e0 fffff800`02ad2f13 : ffffffff`ffffffff 00000000`04bce810 00000000`04bce808 00000000`00008000 : nt!NtFreeVirtualMemory+0x61f
fffff880`08dfbae0 00000000`77a014fa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`04bce7d8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77a014fa
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+3266c
fffff800`02a7bc56 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+3266c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4f558b55
FAILURE_BUCKET_ID: X64_0x1a_403_nt!_??_::FNODOBFM::_string_+3266c
BUCKET_ID: X64_0x1a_403_nt!_??_::FNODOBFM::_string_+3266c
Followup: MachineOwner
---------
Possible causes for the above crash are Memory problems... Drivers...
The crash was related to SABnzbd.exe; uninstall the software to test. If the software is required, re-install the software after uninstalling it. It's possible the software is corrupted.
- If you are overclocking any hardware, please stop.
- Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
If you swap any memory components, follow these steps for ESD safety:
- Shut down and turn off your computer.
- Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
- Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
- Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
Once these steps have been followed, it is safe to remove and replace components within your computer.
- An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
a.
Backup your system and user files
b.
Create a system restore point
c. If you do not have a Windows 7 DVD,
Create a system repair disc
d. In Windows 7:
- Click the Start Menu
- Type verifier in Search programs and files (do not hit enter)
- Right click verifier and click Run as administrator
- Put a tick in Create custom settings (for code developers) and click next
- Put a tick in Select individual settings from a full list and click next
- Set up the individual settings as in the image and click next
Attachment 207625 - Put a tick in Select driver names from a list
- Put a tick next to all non-Microsoft drivers.
- Click Finish.
- Restart your computer.
If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using
System Restore OPTION TWO.
Thanks to zigzag3143 for contributing to the Verifier steps.
If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter: verifier /reset
-> Restart your computer.
Quote