New
#41
Can you post what temperatures you see at idle, then do the stress tests again, and post back what temperatures you get during the stress tests?
Did you follow the steps to Troubleshoot Application Conflicts by Performing a Clean Startup exactly? Did you have any success?
Are you running a RAID configuration for the two drives? Did you create a dynamic disk? Neither of these are recommended for Windows 7 and are known to cause problems.
Strip down your system to run only the bare essentials: one RAM module, the CPU, motherboard, one hard disk, one graphics card (or use onboard graphics if you have it), keyboard, mouse, and one monitor. See how the system behaves by running Windows for twice as long as it typically takes for you to get a crash. If it is stable, add one piece of hardware back at a time until you get crashes again. Take notes of what hardware you add and how the system responds to the hardware changes.
As you add and remove hardware, follow these steps for ESD safety:
- Shut down and turn off your computer.
- Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
- Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
- Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
Once these steps have been followed, it is safe to remove and replace components within your computer.