win7 x32 startup problem with BSOD !!!


  1. partho222
    Posts : 4
    Windows 7 Ultimate x86 SP1
       New #1

    win7 x32 startup problem with BSOD !!!


    i have trouble with starting my windows ... at startup after win logo it shows BSOD and error like "BAD_SYSTEM_CONFIG_INFO" ... and after some restarts with bsod computer start & work normally (sometimes it also show bsod while using computer randomly) . but when i try to restart my computer then it shows BSOD again & again after some restarts with bsod computer start & work normally ... now i am fully frustrated with this , can anyone help me !!

    [i have no recovery disk of windows , all i have an installation disk & i badly need of softwares installed in it ]

    --------------------------------------------------------
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033

    Additional information about the problem:
    BCCode: 74
    BCP1: 00000002
    BCP2: 80791BA8
    BCP3: 00000002
    BCP4: C000014D
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1


    my spec :

    os - win7 32bit
    cpu - dual core E5200
    ram - 2GB
    vga - nvidia geforce 8400 GS 512 MB
      My Computer
    Quote Quote

  3. usasma
    Posts : 5,705
    Win7 x64 + x86
       New #2

    Please provide this information so we can provide a more complete assessment of your issues: https://www.sevenforums.com/crashes-d...tructions.html

    Perfmon /report shows issues with your Virtual Box network adapters. Please uninstall them from your system. Feel free to reinstall them once the system is made stable again.

    Here's the NTSTATUS report of the error:
    Code:
    // MessageId: STATUS_REGISTRY_IO_FAILED
//
// MessageText:
//
// An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.
//
#define STATUS_REGISTRY_IO_FAILED        ((NTSTATUS)0xC000014DL)
    I/O errors commonly mean that there's a hardware problem. Since this is happening on boot, I have to strongly suspect your hard drive. Please run the free, bootable hard drive diagnostics here: HD Diagnostic
    If the hard drive is dead/dying you MUST backup your stuff IMMEDIATELY. There's no telling when it will stop booting into Windows for you - and that will make recovery much more difficult (and expensive!).

    Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

    The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs
    3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
    Code:
    
amdxata.sys           Fri Mar 19 12:19:01 2010 (4BA3A3F5)
SmartDefragDriver.sys Fri Nov 26 04:30:35 2010 (4CEF7E3B)
kl1.sys               Fri Mar 04 04:17:22 2011 (4D70AE22)
DeepFrz.sys           Fri Feb 24 12:58:07 2012 (4F47CFAF)
klif.sys              Wed Apr 20 06:36:47 2011 (4DAEB73F)
kl2.sys               Fri Mar 04 04:17:16 2011 (4D70AE1C)
VBoxDrv.sys           Tue Apr 26 09:10:29 2011 (4DB6C445)
nltdi.sys             Sun Feb 13 17:07:14 2011 (4D585612)
klim6.sys             Thu Mar 10 09:35:57 2011 (4D78E1CD)
VBoxUSBMon.sys        Tue Apr 26 09:10:30 2011 (4DB6C446)
    http://www.carrona.org/drivers/driver.php?id=amdxata.sys
    http://www.carrona.org/drivers/driver.php?id=SmartDefragDriver.sys
    http://www.carrona.org/drivers/driver.php?id=kl1.sys
    http://www.carrona.org/drivers/driver.php?id=DeepFrz.sys
    http://www.carrona.org/drivers/driver.php?id=klif.sys
    http://www.carrona.org/drivers/driver.php?id=kl2.sys
    http://www.carrona.org/drivers/driver.php?id=VBoxDrv.sys
    http://www.carrona.org/drivers/driver.php?id=nltdi.sys
    http://www.carrona.org/drivers/driver.php?id=klim6.sys
    http://www.carrona.org/drivers/driver.php?id=VBoxUSBMon.sys

    BSOD BUGCHECK SUMMARY
    Code:
    
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\041912-20014-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Thu Apr 19 03:47:49.312 2012 (UTC - 4:00)
System Uptime: 0 days 0:00:40.092
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x74
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x74_nt!CmpLoadHiveThread+1d5
Bugcheck code 00000074
Arguments 00000002 80791ba8 00000002 c000014d
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\041912-38906-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Thu Apr 19 00:56:58.205 2012 (UTC - 4:00)
System Uptime: 0 days 0:00:38.984
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x74
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x74_nt!CmpLoadHiveThread+1d5
Bugcheck code 00000074
Arguments 00000002 80799ba8 00000002 c000014d
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\041912-33836-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Wed Apr 18 23:46:36.464 2012 (UTC - 4:00)
System Uptime: 0 days 0:00:43.243
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x74
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x74_nt!CmpLoadHiveThread+1d5
Bugcheck code 00000074
Arguments 00000002 8079dba8 00000002 c000014d
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\041812-38532-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Wed Apr 18 10:40:23.735 2012 (UTC - 4:00)
System Uptime: 0 days 0:00:39.514
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x74
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x74_nt!CmpLoadHiveThread+1d5
Bugcheck code 00000074
Arguments 00000002 8ba67ba8 00000002 c000014d
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\041812-21668-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Wed Apr 18 07:01:37.512 2012 (UTC - 4:00)
System Uptime: 0 days 0:00:43.166
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x74
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0x74_nt!CmpLoadHiveThread+1d5
Bugcheck code 00000074
Arguments 00000002 8ba5bba8 00000002 c000014d
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      My Computer
    Quote Quote

  4. partho222
    Posts : 4
    Windows 7 Ultimate x86 SP1
    Thread Starter
       New #3

    thanks for your assistance :)

    i think you are right i have problem with my hdd .

    hdd diagnostic report
    ------------------------------------

    Code:
    SeaTools Test Code: 6C9AC2A4
Identify - Started 4/19/2012 9:04:02 PM
Short Generic - Started 4/19/2012 9:04:09 PM
Short Generic - FAIL 4/19/2012 9:04:13 PM
SeaTools Test Code: 6C9AC2A4
Long Generic - Started 4/19/2012 9:04:19 PM
Long Generic - FAIL 4/19/2012 9:04:22 PM
SeaTools Test Code: 6C9AC2A4
SMART - Pass 4/19/2012 9:05:11 PM
Short DST - Started 4/19/2012 9:05:16 PM
Short DST - FAIL 4/19/2012 9:06:17 PM
SeaTools Test Code: 6C9AC2A4
    time to change the hdd (still have warrranty)

    btw how can i make an image of my current system (on other hdd or flash disk) ?
      My Computer
    Quote Quote

  6. usasma
    Posts : 5,705
    Win7 x64 + x86
       New #4

    I understand that you can make images using tools like Acronis True Image - but would have to wonder about problems with it because of the problems with the hard drive.

    I'd suggest starting another topic for advice about cloning the hard drive in the General Discussions forum.
      My Computer
    Quote Quote

 

  Related Discussions
I INSTALLED WINDOWS 7 WAS ON HARD, BUT AFTER END OF THE INSTALL WHEN RESTART GIVE ME THIS PROBLEM PLZ HELP ME THIS PICTURE http://im46.gulfup.com/7b8E2P.jpg
Hello All, Hope you are doing well. Before I go one to explain my predicament, my system specs are given below. 1. Samsung Ultrabook Series 5 - Model NP530U3C-A01UK 2. Processsor - Intel Core 5-3317U CPU @1.70 Ghz 3. Windows 7 Hope Premium - 64 Bit OS 4. No Optical Drive From last few...
BSOD at startup - Win7
in BSOD Help and Support

Hi It seems that each time I switch my PC on... it boots into Win7 and then I get a BSOD. It reboots and runs chkdsk, currently finds nothing, and boots into Win7 normally and all is well. I've attached the various reports and files, and seems that chkdsk runs 'cos I have a "dirty bit", but I'm...
Win7 startup problem!!!
in BSOD Help and Support

Hi, I have a problem starting my laptop (it's toshiba satelite, 2Gb RAM, Win7 ultimate edition) So... I press the star button, the PC turns on and when it gets on the first screen (where it usually shows the computer provider, and from where I can access the BOOT MENU) it stops. Total block:...
I have a home network that consists of 2 Win7's and one XP pc. All works perfectly when the Win7's see the XP; if the XP is turned on first all is good. If I turn on the XP last, ie. using Wake-on-Lan, the Win7's won't see the XP. If I do a logout/login on the Win7's then the XP shows up. ...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 й Designer Media Ltd
All times are GMT -5. The time now is 09:39.
Find Us