New
#61
it only crashes with 4 modules.
sorry but i though copying all the easytune screens gave what you needed from bios.
(this is sorta getting into voodoo mode for me now)
ht frequency ratio, k8 cpu clock ratio, ddr clock/timing mode settings are on auto.
cpu frequency 200
cpu/ddr clock ratio 2/1.66
ddr speed 333
cas# latency 2.5
min ras# active time 7t
ras# to cas# delay 3t
row precharge time 3t
row to row delay 2t
row cycle time 10t
row refresh cycle time 12t
read to write time 4t
write recovery time 3 bus clock
write to read delay 1 bus clock
refresh rate 166 mhz, 7.8 us
read preamble value 6 ns
async latency value 7 ns
cpu spread spectrum center spread
pcie clock 100 mhz
hammer vid control = startup
robust graphics booster auto
cpu voltage control normal
normal cpu vcore 1.400 v
chipset core pcie voltage normal
ht link voltage control normal
ddr voltage control normal
please let me know if i left anything out.