|24 Apr 2012||#2|
These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.
* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
* If you have a Raid update its Driver.
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool
*Boot from the CD, and leave it running for at least 5-7 passes.
Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.
Test the sticks individually, and if you find a good one, test it in all slots.
Any errors are indicative of a memory problem.
If a known good stick fails in a motherboard slot it is probably the slot.
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.
I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).
In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .
Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.
If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking
Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Thanks to JGriff2 & Usasma.
Using Driver Verifier (Windows Drivers)
|My System Specs|
|Similar help and support threads|
Unable to start - black screen or empty blue screen w cursor??
Hello, My laptop will not boot. I end up with an empty black screen or a blue screen with no icons, just a cursor. I get choices for 'normal startup' or ' repair' but not safe mode. Any help appreciated.
Geforce 7300 LE - Blue screen of death - Multiple lines down screen.
Today I booted my computer up to be promoted with a black screen, I gave it a good half an hour before forcing it to shutdown, to which when I booted it back up. Was then promoted with a blue screen about the video card not being able to lead, that happened twice. I then booted it into safe...
Blue Screen Error but no actual blue screen pops up
While using my laptop, usually when trying to open some "windows" application such as task manager, wireless networks, documents, media player, windows updater etc. my laptop freezes or doesn't allow me to click on anything except the minus button on all my windows and the start button. I'll try to...
|BSOD Help and Support|
Blue Screen out of the Blue, Was working fine for 9+ hours then c...
Well i had my computer on all day since i woke up @ 8 in the morning gaming and what not. It had finally crashed on me while i was playing dirt 2 a couple of mins ago. I had fixed all my previouse blue screen problems by not using any AMD OverDrive Settings for my Radeon HD 4850. My specs...
|BSOD Help and Support|
Help with blue screen auto reboot, Stop: 0x0000007B error screen
Hello, I have an HP Pavilion g series laptop (running win7) that is in a continuous restarting loop. This happened after the computer auto updated (windows update). I do not know what was updated, but now every time the laptop starts up it seems to be in a continuous rebooting loop after the...
|BSOD Help and Support|
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
All times are GMT -5. The time now is 19:31.