BSOD - Windows 7 Ultimate 64bits TO MANY Different BSOD


  1. Posts : 2
    Windows 7 Ultimate x64
       #1

    BSOD - Windows 7 Ultimate 64bits TO MANY Different BSOD


    Hi All,

    I’ve come across a series of BSODs and i don't know how to solve this because it's always different erros! PLS help

    My system:
    OS: Windows 7 Ultimate 64 bits
    Motherboard: Gigabyte- GA-EX58-EXTREME
    GPU: Radeon HD 6970 - GV-R697OC-2GD
    CPU: i7 920
    Memory: CORSAIR XMS3 4096MB DDR3 1333MHZ CAS9 (3X4GB)=12GB
    Power Pupply: Corsair AX850
    HDD: 1X Matrox 500GB and 1X Toshiba 500GB

    Some of the BSOD erros:
    NTFS_FILE_SYSTEM
    MEMORY_MANAGEMENT
    PFN_LIST_CORRUPT
    SYSTEM_SERVICE_EXCEPTION
    KMODE_EXCEPTION_NOT_HANDLED
    BAD_POOL_CALLER

    The File has all the info about the BSOD
    I've installed windows more then 5 times but i still get the BSOD with and without drivers installed.

    thank you and i hope you could help me!
      My Computer


  2. JMH
    Posts : 7,952
    Win 7 Ultimate 64-bit. SP1.
       #2



    We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

    If you are overclocking STOP



    We could also use some system information, which you can get easily by running msinfo32.
    To do that go to start>run>type msinfo32>enter

    When it is finished running go to file>save>name it and upload to us here.



    You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

    To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

    The procedure:
    * Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
    * Zip up the copy.
    * Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
    *If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

    To ensure minidumps are enabled:
    * Go to Start, in the Search Box type: sysdm.cpl, press Enter.
    * Under the Advanced tab, click on the Startup and Recovery Settings... button.
    * Ensure that Automatically restart is unchecked.
    * Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
    * Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
      My Computer


  3. Posts : 2
    Windows 7 Ultimate x64
    Thread Starter
       #3

    Here are the files!
    This computer it's not Overclocked
    Thank you
      My Computer


  4. JMH
    Posts : 7,952
    Win 7 Ultimate 64-bit. SP1.
       #4


    These crashes were caused by memory corruption/exception (Cx05) probably a driver.
    Please run these two tests to verify your memory and find which driver is causing the problem.


    * If you are overclocking anything reset to default before running these tests.
    In other words STOP!!!

    * If you have a Raid update its Driver.




    Memtest.
    *Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

    *Boot from the CD, and leave it running for at least 5-7 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.

    Any errors are indicative of a memory problem.

    If a known good stick fails in a motherboard slot it is probably the slot.


    RAM - Test with Memtest86+






    Driver Verifier

    Using Driver Verifier is an iffy proposition.
    Most times it'll crash and it'll tell you what the driver is.
    But sometimes it'll crash and won't tell you the driver.
    Other times it'll crash before you can log in to Windows.
    If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

    I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
    Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    NOTE: You can use Low Resource Simulation if you'd like.
    From my limited experimentation it makes the BSOD's come faster.
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    If you are using win 8 add these

    - Concurrency Stress Test
    - DDI compliance checking

    Reboot the system and wait for it to crash to the Blue Screen.
    Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
    The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
    If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.


    Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.


    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

    Thanks to JGriff2 & Usasma.
    Using Driver Verifier to identify issues with Windows drivers for advanced users

    Driver Verifier

    Using Driver Verifier (Windows Drivers)
      My Computer


  5. Posts : 28,845
    Win 8 Release candidate 8400
       #5

    In addition to JMH's suggestions please update these drivers. Both are from 2008

    Code:
    SaiK0728.sys    1/18/2008 2:28:04 PM       
    jraid.sys    11/3/2008 10:20:09 PM
    How To Find Drivers:
    - search Google for the name of the driver
    - compare the Google results with what's installed on your system to figure out which device/program it belongs to
    - visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
    - if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
    - - The most common drivers are listed on this page: Driver Reference Driver Reference
    Driver Reference Table
      My Computer


  6. Posts : 1
    Windows 7, Professional 64bit
       #6

    HI,
    I have been getting lot of reboot on my machine each now and then. I had thought I could ignore it and today it happened like 5times when just doing normal browsing and opening of files.
    My System:
    OS: Windows 7 Professional 64 Bit
    Make: HP Compaq 7500 microtower
    RAM: 8GB Ram (shipped with 2GB), added 3 module( 2GB each) Apacer DDR2-800
    Graphics Display(built in): Intel(R) G45/G43 Express Chipset (Microsoft Corporation - WDDM 1.1)
    BOD info:

    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033

    Additional information about the problem:
    BCCode: 116
    BCP1: FFFFFA800A893010
    BCP2: FFFFF88003E46CB0
    BCP3: 0000000000000000
    BCP4: 0000000000000002
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1

    I hope i have provided the required information. Thank you kindly.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:35.
Find Us