![]() |
|
30 Apr 2012 | #11 |
|
I just got a BSOD and a minidump was created here is the link to it.
https://***************/files/2311512...2-12916-01.dmp PS: viewing with blue screen viewer It showed me that the problems were: atarop:sys, hal.dll and ntoskrnl.exe Here's also the event viewer. Please download the free version of Malwarebytes. Update it immediately. Do a full system scan Let us know the results at the end. Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape! |
My System Specs![]() |
. |
|
30 Apr 2012 | #12 |
|
This is what i got from the malware detector that you suggested.
. |
My System Specs![]() |
30 Apr 2012 | #13 |
|
|
My System Specs![]() |
. |
|
30 Apr 2012 | #14 |
|
The problem is that I had a few of those crashes earlyer and one of them was a new one "page fault in nonpaged are" when the blue screen finished writing the information, after the restart the minidump wasn't created, i would like to know a solution for that or the cause of it.
|
My System Specs![]() |
30 Apr 2012 | #15 |
|
The problem is that I had a few of those crashes earlyer and one of them was a new one "page fault in nonpaged are" when the blue screen finished writing the information, after the restart the minidump wasn't created, i would like to know a solution for that or the cause of it.
|
My System Specs![]() |
03 May 2012 | #16 |
|
Got another DMP
|
My System Specs![]() |
03 May 2012 | #17 |
|
Stop 0x124 is a hardware error
If you are overclocking try resetting your processor to standard settings and see if that helps. If you continue to get BSOD here are some more things you may want to consider. This is usually heat related, defective hardware, memory or even processor though it is"possible" that it is driver related (rare). Quote:
Stop 0x124 - what it means and what to try
Synopsis: A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. Generic "Stop 0x124" Troubleshooting Strategy: 1) Ensure that none of the hardware components are overclocked. Hardware that is driven beyond its design specifications - by overclocking - can malfunction in unpredictable ways. 2) Ensure that the machine is adequately cooled. If there is any doubt, open up the side of the PC case (be mindful of any relevant warranty conditions!) and point a mains fan squarely at the motherboard. That will rule out most (lack of) cooling issues. 3) Update all hardware-related drivers: video, sound, RAID (if any), NIC... anything that interacts with a piece of hardware. It is good practice to run the latest drivers anyway. 4) Update the motherboard BIOS according to the manufacturer's instructions. Their website should provide detailed instructions as to the brand and model-specific procedure. 5) Rarely, bugs in the OS may cause "false positive" 0x124 events where the hardware wasn't complaining but Windows thought otherwise (because of the bug). At the time of writing, Windows 7 is not known to suffer from any such defects, but it is nevertheless important to always keep Windows itself updated. 6) Attempt to (stress) test those hardware components which can be put through their paces artificially. The most obvious examples are the RAM and HDD(s). For the RAM, use the in-built memory diagnostics (run MDSCHED) or the 3rd-party memtest86 utility to run many hours worth of testing. For hard drives, check whether CHKDSK /R finds any problems on the drive(s), notably "bad sectors". Unreliable RAM, in particular, is deadly as far as software is concerned, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result from the diagnostics utilities does not guarantee that the RAM is free from defects - only that none were encountered during the test passes. 7) As the last of the non-invasive troubleshooting steps, perform a "vanilla" reinstallation of Windows: just the OS itself without any additional applications, games, utilities, updates, or new drivers - NOTHING AT ALL that is not sourced from the Windows 7 disc. Should that fail to mitigate the 0x124 problem, jump to the next steps. If you run the "vanilla" installation long enough to convince yourself that not a single 0x124 crash has occurred, start installing updates and applications slowly, always pausing between successive additions long enough to get a feel for whether the machine is still free from 0x124 crashes. Should the crashing resume, obviously the very last software addition(s) may be somehow linked to the root cause. If stop 0x124 errors persist despite the steps above, and the harware is under warranty, consider returning it and requesting a replacement which does not suffer periodic MCE events. Be aware that attempting the subsequent harware troubleshooting steps may, in some cases, void your warranty: 8) Clean and carefully remove any dust from the inside of the machine. Reseat all connectors and memory modules. Use a can of compressed air to clean out the RAM DIMM sockets as much as possible. 9) If all else fails, start removing items of hardware one-by-one in the hope that the culprit is something non-essential which can be removed. Obviously, this type of testing is a lot easier if you've got access to equivalent components in order to perform swaps. Should you find yourself in the situation of having performed all of the steps above without a resolution of the symptom, unfortunately the most likely reason is because the error message is literally correct - something is fundamentally wrong with the machine's hardware. |
My System Specs![]() |
03 May 2012 | #18 |
|
How do i check if im overclocking? i don't understand the meaning of "overclocking" correctly and how should I restore the default setting? I am sorry if this sounded very "newbish"
|
My System Specs![]() |
03 May 2012 | #19 |
|
If you don't know what overclocking is, it {usually} means you have not altered any thing - which from a BSOD perspective is a good idea.
The purpose of overclocking is to increase the operating speed of given hardware. FYI Overclocking - Wikipedia, the free encyclopedia |
My System Specs![]() |
06 May 2012 | #20 |
|
Did all the tests above, everything went fine without any errors...
When i checked the minidump with Blue Screen viewer hal.dll and ntoskrnl.exe was at fault. I think whats making these BSODs is my Graphic card (Nvidia Geforce GTS250), so im buying a new one which is MSI NVIDIA GeForce GT 440 PS: Is my new Graphic card better then older one? Cause i'm not really good at comparing... Thanks BTW I'm still getting the BSOD on Aion, but when i change my Graphic card i'll inform you if i get any BSODs and if it's fixed |
My System Specs![]() |
![]() |
Thread Tools | |
Similar help and support threads | ||||
Thread | Forum | |||
BSOD on Shutdown; "Driver IRQL not Less or Equal" Hi All, First time posting on this forum, please let me know if you need additional information. About a week ago my laptop (Asus, Windows 7, 64 bit) started to get a BSOD on shutdown. The shutdown starts as normal, then when it gets to the part where it goes to something similar to the start up... |
BSOD Help and Support | |||
3 BSOD's after new GPU, "Reference by Pointer" and "BAD POOL HEADER" Hey all, I've gotten a couple blue screens over the past couple of days. I just replaced my GTX 660 with a 960 over the past weekend and received a Bad pool header BSOD on the 9th, then today (the 11th) 2 Reference by pointer BSOD's. I've done some research and it seems to all point to driver... |
BSOD Help and Support | |||
BSOD on high CPU load "IRQL not less or equal" Looks like some heating related issue, as the laptop airflow is not among the best... Would be great if I knew for sure. Thanks, D |
BSOD Help and Support | |||
BSOD "Reference by Pointer" Win 7 x64 on a Dell E510. Worked fine for more than a year. Suddenly developed BSOD with "Reference By Pointer". Re-booting usually fixes it, but it comes back. DMP file attached. |
BSOD Help and Support | |||
BSOD: "Reference by Pointer" Need Help! I have some problem on my Toshiba M645 Laptop. The blue screen "Reference by Pointer" came out when I played the video while doing another graphic works and P2P uTorrent . I was already do "sfc /scannow" in command prompt and it said "Windows Resource Protection did not find any integrity... |
BSOD Help and Support |
Our Sites |
Site Links |
About Us |
Find Us |
Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd All times are GMT -5. The time now is 22:31. |
![]() ![]() ![]() ![]() ![]() |