BSOD playing Aion, "REFERENCE BY POINTER" and "IRQL NOT LESS OR EQUAL"

No, it has the same problem. Mokrab, I hate to be the bearer of bad news, but you are going to have a really hard time finding a power supply that will feed 22amps to the 12volt rail in your budget. Maybe it's best for you to wait and save up a bit to get something that will be more reliable and will meet your needs. I have poured through the site that you gave me and I just can't find anything in your price range.

I do wish you the best of luck. And if we can do anything for you let us know. If you need more advice after you have saved a bit more, let us know.

Take care,

James

Hello mokrab. Yes that is a very good power supply and will sufficiently power your current system. It is actually one that I recommended to you. As far as the BSOD, your Bug CHeck Code is a stop 0x124. This code relates to hardware. Since we know that your current PSU does not provide enough amperage and voltage to your system, we have to start there. Under powering your system can cause a large amount of problems, including BSODs and Stop 0x124 errors. There may be other issues, but since we know your power supply is a contributing factor, we can not effectively test anything else. Try not to worry though. And let us know when you get the new PSU in. Make sure that all the connections are seated properly and follow ESD safety;

1. It is a good idea to buy an anti-static wristband, and follow the instructions for use.(They are sold at most electronics stores.) If you are going to do quite a lot of bench work, you might do well to invest in an anti-static mat.
2. If you don't have a wristband, you are not necessarily out of luck. Assuming that your PC is grounded, you can ground yourself by just keeping one hand in contact with the bare metal frame (not a painted or coated surface) of the computer case. Keep the PC power cord plugged in to a (3-prong) grounded outlet and turn off the rocker switch on the back of the power supply. If the power supply does not have a switch on the back, this won't work, however. Never work on a PC with the power on. In that case, you should buy an anti-static band or try another method of grounding.
3. As an alternative, alter a standard 3-conductor power cord by snipping off the two flat blades, leaving only the grounding portion of the plug. Or simply purchase a cord like this from an electronics supply house. This accomplishes the same thing as turning off the rocker switch.
4. You can employ an LCD Static Discharger. As a simple measure, you can hang it on your key ring and just dangle it. This is less reliable, but when it touches a ground, it should discharge the static electricity. Procedure：①Lightly touch the oval button with a finger. ②Make sure that the end of the conductive material touches a grounded conductor. (such as vehicle, human body, computer, metal or other) to release static electricity, and observe the LCD display.
5. Some people claim that damage can be reduced by wearing little or no clothing, it is said that the less cloth that is in contact with your body, the less static is produced, though these claims remain unproven.

The average person can carry up to 25,000 volts of static energy at any given time. This sounds like a lot, but because the current level is low, you usually won't notice it. Follow safe ESD procedures any time you open a computer.

If the equipment is cold, wait until it has reached room temperature. ESD builds up much faster when it's cold and dry (low humidity).

If you don't take steps to prevent ESD, you may regret it. Your computer can sustain serious damage without you knowing it. CPUs and memory chips of any kind are highly vulnerable to ESD. If you fry your PC with static electricity, you may soon start to notice random memory errors, blue screens, and lock-ups. Normally, you can't see (or even feel) ESD, but it is almost always there, so be sure to do the right thing. Your PC will thank you!

Try not to open up computers while on thick carpets, petting long-haired pets, dressing, emptying the dryer, etc. Use common sense; don't do anything that would cause you to get a shock from touching something made of metal.