Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows7 BSOD Problem

30 Aug 2009   #11
Skynet74

windows 7
 
 

Quote   Quote: Originally Posted by chev65 View Post
There is a way to set the memory up properly on that board. I would seriously look into that first, memory timings and voltages matter even more when running 8GB. You haven't listed the type of memory you are running so I can't look up the specs for your Ram.

Your bios shows plenty of ways to set the memory timings and voltages. You can even overclock your board. The memory timings and voltage settings are very useful on this type of board.
ASUS M3N78 Pro Motherboard Review :: BIOS and Overclocking :: Motherboards.org

only stats i have for memory as it was brought as a bundle are from the website's shop the memory its self is heat shuilded i cant read nothink but heres what on the web

Code:
SPECIFICATION :
GENERAL SPECIFICATIONS 240 PIN Memory 1066 Mhz DIMM (DUAL IN-LINE MEMORY) Non-ECC Non-Parity Voltage 1.8V Gold leads Unbuffered Cas Latency 7.0 8 GB (4X 2GB)
The SPD is programmed to JEDEC standard latency timing of 7-7-7-20 (CL-tRCD-tRP-tRAS). Each 240-pin DIMM uses gold contact fingers and requires 2.0 ~ 2.1V.



My System SpecsSystem Spec
.
01 Sep 2009   #12
Skynet74

windows 7
 
 

Quote   Quote: Originally Posted by usasma View Post
Thanks! I missed the scroll down part
The good news is that your Asus stuff (to include the ASACPI.sys file) is updated to 2008.

The bad news is that this looks to be a problem with your NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter. But this is not certain as the error actually occurred in npfs.sys (the Named Pipes File System driver). But it was executing in the wg111v2.exe process - and your wg111v2.sys drivers are from 2007.

So...
Vista x64 drivers are here: Answer
Download them and save them to your Desktop
Uninstall the drivers that you currently have installed (Start > Programs > NETGEAR WG111v2 Adapter > Uninstall NETGEAR WG111v2 Smart Wizard).
Install the fresh drivers in Compatibility Mode for ALL USERS. Select "Run as Windows Vista" and "Run as administrator" and install them.
Test for further BSOD issues.
^^^^
Thankyou so much spot on , ive had no BSOD for 48 hours infact this is the longest the computers been on for
My System SpecsSystem Spec
01 Sep 2009   #13
Tews

64-bit Windows 8.1 Pro
 
 

Good to see you have it all sorted out!
My System SpecsSystem Spec
.

Reply

 Windows7 BSOD Problem




Thread Tools




Similar help and support threads
Thread Forum
Compatibility Problem In Windows7
Help! I Had Mixcrografx Draw6 on my old XP machine and when MS stopped support of XP, I bought a new PC running Windows7 Home. I transferred all my files and settings from the XP machine to the new Windows7 machine. But on the new machine Draw6 will not open. Not even in compatiblity mode. I...
Software
Problem with Windows7 + netbeans
Hi all, I have installed the Chinese language pack in my system. I am getting the Chinese fonts in the notepad. But i am not getting the chinese text in the Netbeans7.0.1 IDE. The operating system in my PC is Windows7. I need to enable chinese text in netbeans. But netbeans7.0.1 + Windows ...
Software
BSOD Windows7 Ultimate x64 problem
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1063 Additional information about the problem: BCCode: 1e BCP1: 0000000000000000 BCP2: 0000000000000000 BCP3: 0000000000000000
BSOD Help and Support
Windows7 Mouse Problem
Computer-studio XPS 16 labtop OS- Windows 7 64-bit Mouse- logitech G500 gaming mouse I recently upgraded from vista to windows 7 and I've noticed a problem with the way my mouse functions now. I play several video games and I've noticed that for some reason, the game doesn't register...
Hardware & Devices
xp32 to windows7 x64 problem !
hi everyone ,, I'm having some troubles in upgrading from xp 2 windows 7 when i insert the CD and make to pc boot from it .. it doesnt it tries to boot or something but then it logs in windows XP when i click on the cd from my computer -> autorun it says that its not a valid win32...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:48.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App