New
#41
One other question. Is your system drive (Windows Install) an image from another PC?
All those "Aktiv" partitions and un-necessary drivers leads me to believe it is.
One other question. Is your system drive (Windows Install) an image from another PC?
All those "Aktiv" partitions and un-necessary drivers leads me to believe it is.
Yup sorry i live in denmark :P hehe and is a habit to install in danish when i can
i have uploaded Screenshots of the drivers .
and i should have installed what the CD has to offer except some utilities etc.
and it is NOT a image it is a fresh install , and dunno why it says microsoft drivers that are so old
and it is my frst build ever, so dont have much idea on how to setup things.. and my DVD driver should not be in a fast SATA slot but is put into one of the 3 GB slots.
I have no Raid cards installed either,
i have only been testing when promted here on this forum, considered trying to install on normal HDD but havent got to that yet.
Ok, those pictures cleared up my confusion. And it does look like the Intel drivers are installed now. That didn't match what was in your uploads before. The iastor.sys driver wasn't showing up in the dumps or your driver list.
I looked at the board docs and I think I have that part figured out. The Amedia controller is for the eSATA ports 7 & 8. Ports 1-6 are on the Intel controller. If you would, I'd like you to try the setup shown in the picture below. This setup puts the SSD on Port-1 (channel-0). The DVD and HDD really don't matter about the sequence but leave the HDD disconnected for the time being. Leave the DVD connected in case a repair is needed. Be sure to power down completely and un-plug the power cable before moving/removing cables inside. I just need to convince myself that the I/O errors aren't because the pagefile may have been spread to the HDD.
Hey, I have enough trouble with English myself. Dansk just puts another level of confusion in my head. :)
Forgot to mention: All cables are on the LOWER SATA ports.
i will do it in the morning:) its dark and i like doing this in daylight instead of normal electric light :S and i can see i only need to remove my dvd and put it where you want my hdd and SSD actually already is in your suggested ports hehe :)
and then again give me 10 mins hehe :P
Just boot and try to run. We'll see if the same I/O crash occurs.
aww man .. :P then i cannot play games with only ssd online hehe
and btw im still running with veriryer on!
Also get a new snip of the Disk Manager. Disk 0 should be the C: drive.
That's looking good. I'll be on-line for a few more minutes then later. Big game tonight so I may only be browsing.
Go Spurs Go!