New
#11
Up to 5 successful passes on Memtest86+
here's a small snippet from the Motherboards manual: Gigabyte GA-Z68AP-D3 | Manual - Page 37
Extreme Memory Profile (X.M.P.), System Memory Multiplier (SPD), Memory Frequency(Mhz)
The settings under the three items above are synchronous to those under the same items on the Advanced Frequency Settings menu.
Performance Enhance
Allows the system to operate at three different performance levels.
Standard -- Lets the system operate at its basic performance level.
Turbo -- Lets the system operate at its good performance level. (Default)
Extreme -- Lets the system operate at its best performance level.
DRAM Timing Selectable (SPD)
Quick and Expert allows the Channel Interleaving, Rank Interleaving, Channel A Timing Settings, and Channel B Timing Settings items to be configurable. Options are: Auto (default), Quick, Expert.
Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to Profle1 or Profle2, this item will display the value based on the SPD data on the XMP memory.
So it sounds like the XMP is on by default but I will verify setting after the 7th RAM testing pass