Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Memory_Management BSOD

14 May 2012   #11
Ka6Scope

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Most of the files in SFC that were corrupt (and some could not be repaired) were related to themes. Did you mod your wallpe[per, etc?
I did. I had installed the Midnight windows 7 theme.

EDIT: I uninstalled the theme by deleting the files from C:/Windows/Resources/Themes.

Where do I go from here? Just wait it out and see if I get any more errors or blue screens?


My System SpecsSystem Spec
.
14 May 2012   #12
zigzag3143

Win 8 Release candidate 8400
 
 

Honestly yes. You may want to start thinking about a clean install.
My System SpecsSystem Spec
14 May 2012   #13
Ka6Scope

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Honestly yes. You may want to start thinking about a clean install.
Now that I've deleted the theme and done some cleanup, everything seems to be running smoothly so far.

I'll try it out for a few days and see if it runs without errors or BSODs. If it does then I will mark this as solved. :)

If not then I will try a fresh install of Windows. I REALLY hope I don't have to resort to that since it would mean reinstalling all of my programs AND all the drivers that I just updated

I will let you know how it goes. Thanks for all your help Zigzag!
My System SpecsSystem Spec
.

14 May 2012   #14
Ka6Scope

Windows 7 Home Premium 64 bit
 
 

Ok do I decided to run a Memtest just in case my memory was bad. It's currently on the first pass still and it's already got 1,006 errors. I know that I have to switch the ram and the slots to figure out if it's a faulty ram stick or mobo slot but is this definitely faulty memory? I mean over 1000 errors?
My System SpecsSystem Spec
14 May 2012   #15
Ka6Scope

Windows 7 Home Premium 64 bit
 
 

Bump. Sorry about the multiple posts but I need to know ASAP if I should be looking to buy new memory or not.
My System SpecsSystem Spec
15 May 2012   #16
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Ka6Scope View Post
Bump. Sorry about the multiple posts but I need to know ASAP if I should be looking to buy new memory or not.
With that many errors it is either RAM or a mobo slot. Run memtest on each slot using known good ram
My System SpecsSystem Spec
15 May 2012   #17
Ka6Scope

Windows 7 Home Premium 64 bit
 
 

Ok just ran the first stick in the first slot for 10 passes and got no errors so I'll run that stick in each slot now to determine of any of the slots are bad. If not, I'll test the 2nd 3rd and 4th sticks individually to see which ones are faulty.
My System SpecsSystem Spec
15 May 2012   #18
Ka6Scope

Windows 7 Home Premium 64 bit
 
 

Ok so I ran the 2nd stick in the 2nd slot and got no errors. Now I'm trying to run ram in the third slot and I keep getting the dram_led light meaning it's not working. No matter what configuration I put them in it won't boot when something is in that 3rd slot, except when all 4 are in, which is when I got the thousands of errors.
My System SpecsSystem Spec
15 May 2012   #19
Ka6Scope

Windows 7 Home Premium 64 bit
 
 

HUGE problem. Now when I try to put any ram into ANY slot, it givese the ram error light and keeps restarting after a few seconds. My monitor won't even show anything at all so I can't even get into the bios or try booting in safe mode. What do I do?
My System SpecsSystem Spec
15 May 2012   #20
writhziden

Windows 7 Home Premium 64 Bit
 
 

Try a hardware/software reset of the BIOS.
  1. Shut down and turn off the computer.
  2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
  3. "Remove the computer from any port replicator or docking station, disconnect
    cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
  4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
    power from components is drained to clear the software connections between the BIOS
    and hardware and clear any corruption in the temporary memory.
  5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
    and mouse should suffice and be the only peripherals reconnected.
  6. Turn it on to reinitialize the software connections between the BIOS and hardware
My System SpecsSystem Spec
Reply

 Memory_Management BSOD




Thread Tools




Similar help and support threads
Thread Forum
Memory_management bsod
I have been getting bsod every couple of weeks. Can someone review these dumps and let me know what you think? Marc
BSOD Help and Support
BSOD Memory_Management
Age of system hardware is 7 days. Age of OS is 7 days. OS: Windows 7 x64 Spec: Core i7 950 12GB Corsair RAM Gigabyte GA X58A-UD3R (Rev 2, i think?) XFX HD 5670 1GB (ATI) Samsung Spinpoint 1TB HDD (sata)
BSOD Help and Support
BSOD memory_management
Hi all. Me and brother built this pc on saturday 24th july 2010. Its all installed correctly but i seem to get the BSOD every now and again. Sometimes happens 3 times in an hour, other times the comp runs for hours. Its a phenom II 1055 Radeon hd5850 Win 7 64bit 4GB pc3 1600MHZ 550w...
BSOD Help and Support
Memory_Management BSOD
Please help! Keep getting a memory_managemnt blue screen... Attached is my DMP File! Thanks, Jay
BSOD Help and Support
Memory_management bsod
I bought a new PC and installed Win7 x64 Professional. Ran fine for a while, turned it off at night and turned it on in the morning - crashed constantly and gave memory_management bsods (WhoCrashed reported ntoskrnl.exe as the culprit). After being unable to keep Windows stable, I made a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:09.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App