Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: New Windows 7 Pro Install With Raid 1 Problem

13 May 2012   #1

Windows 7 Pro x64
New Windows 7 Pro Install With Raid 1 Problem

I install win 7 like I normally do. This system I installed windows 7 pro with a RAID 1 Everything installed great. I install all the updates and other programs with no problems I shut it down two days ago and went to start it yesterday, and the windows logo shows and then to an arrow and there it stops. I can move the arrow. Just a black screen. If I try and do a restore I load the RAID drivers and it can't find a windows set to do so. I know there are restore points it just doesn't show any. What's up with just the arrrow? Any help would be greatly appriciated. I don't want to reinstall everything again. There has to be something I'm missing or something I can do.

I think the the unit has started. I just can't get to or see the desktop. Does that make any sence to anyone. The drive activity is on solid it just won't boot to the destop it seems.

My System SpecsSystem Spec
13 May 2012   #2

Win 7 Ultimate 64-bit. SP1.

My System SpecsSystem Spec

 New Windows 7 Pro Install With Raid 1 Problem

Thread Tools

Similar help and support threads
Thread Forum
HDD or Raid Problem after fresh install on HP envy 6-1012tx
I bought an hp envy 6-1012tx ultrabook two months before and after 45 days it's hard drive crashed. As it was in warranty I took it to the nearby HP sales and services centre for repairing. They repaired it saying that the hard drive has been changed. Since I haven't made recovery discs, everything...
Installation & Setup
New RAID Array and Clean Install Win7HP-Help with RAID Driver Install
Hi :confused:, RAID and Win 7 Home Premium newbie. Short version of long story - replaced old dead RAID Drives in Win XP system with (2) new 500GB Drives plus plan to upgrade RAM to 8GB (would have liked more but $$$) and install new OS = WIN 7 Home Premium 64 Bit. MB is GA-EP45-UD3R Rev 1.1...
Installation & Setup
Windows 7 w/Raid 1 Re-install
Hi folks, I am about to do a re-install of Windows 7 on my non-raid primary hdd. I have 2x 2TB data disks that are configured as Raid 1 and Windows is managing these drives. How do I go about preserving the data on the raid drives, as I'm assuming that a fresh install of Windows will no longer...
Installation & Setup
Asus Rampage IV Extreme x79 Raid Problem (Can't Install Drivers)
Asus Rampage IV Extreme Raid Problem Just got my new motherboard. Got everything setup. Installed my HDD and a brand new never used SSD. Now this is were the fun starts... I boot into Windows 7 installer using a USB flash drive with SP1 already on it. I have used this flash drive for...
Hardware & Devices
Marvell Raid 0 Driver Problem on SATA III 6Gb on 64 bit install
I have recently bought 2 1Tb Western Digital SATA III 6 Gb HDDs. The idea being, that I would Install Windows 7 Ultimate 64 bit via the onboard Marvell controller in Raid 0. I have not even got past the Collecting Information part of install, because no matter what Driver I try to load, Windows...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:02.
Twitter Facebook Google+