New
#31
Disk check looks clean. We'll see what happens with the memory diagnostics.
Disk check looks clean. We'll see what happens with the memory diagnostics.
ok, I cooked the memtest overnight..
made seven passes and all seven passes is clean, no errors..
if you want me to post the snapshot for that, lemme know..
thanks..
so whats my best next step since my disk and mem looks clean
T.T
Amazing grace..
a minidump was created last night before I did the memtest..
and here it is, hope you guys can help me check it out..
Please follow the https://www.sevenforums.com/crashes-d...tructions.html to provide us with the full crash reports.
Interestingly, you have been asked for this information on all four pages of this thread now... Fourth time's a charm?
Last edited by writhziden; 26 May 2012 at 10:50.
In the meantime: Your crash points to memory problems or driver conflicts.
- If you are overclocking any hardware, please stop.
- Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
WarningBefore you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!
For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
- Shut down and turn off your computer.
- Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
- Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
- Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
- An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
a. Backup your system and user filesThe idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.
b. Create a system restore point
c. If you do not have a Windows 7 DVD, Create a system repair disc
d. In Windows 7:
- Click the Start Menu
- Type verifier in Search programs and files (do not hit enter)
- Right click verifier and click Run as administrator
- Put a tick in Create custom settings (for code developers) and click next
- Put a tick in Select individual settings from a full list and click next
- Set up the individual settings as in the image and click next
Attachment 213901- Put a tick in Select driver names from a list
- Put a tick next to all non-Microsoft drivers.
- Click Finish.
- Restart your computer.
If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.
Thanks to zigzag3143 for contributing to the Verifier steps.
If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:verifier /reset-> Restart your computer.
You already ran memtest86+ once for seven passes, so it is up to you whether you want to run it again. I would recommend it when you find time to run it again.
I tried the verifier once..
it BSOD on me once but again, it did not create a dump file..
I will cook the windows memory diagnostic overnight tonight and post the results out..
if still memory clean, then I will try and provide the other info u requested (for the fourth time)..
sigh..
Sometimes having Verifier active on too many drivers at once can prevent .dmp files from being created. Try Verifier on only five non-Microsoft drivers at a time. Run that for 24-36 hours. Then try the next set of five. Run that for another 24-36 hours. Etc. Do so until you have tested all non-Microsoft drivers.
I've decided to screw it all and reinstall my windows
and see how it goes from there..
Thanks for all the suggestions but I think I will be back after the re-installation.
LOL
Good luck!