Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: My screen sometimes appear "No Signal" word and become a blank screen

29 May 2012   #1
Microsoft MVP


Check connections between:
- video card to motherboard
- video card to cable
- cable to monitor

Try another monitor

Try these free diagnostic tests: Hardware Diagnostics

My System SpecsSystem Spec
30 May 2012   #2
Microsoft MVP


What are the results of the diagnostic tests?
My System SpecsSystem Spec
31 May 2012   #3
Microsoft MVP


I cannot understand the report that you posted.
Please follow the instructions step-by-step, one line at a time.

MemTest is first: Memory Diagnostics
Then the Hard drive test: Hard Drive Diagnostic Procedure
Then the malware test (in case your protection is compromised: Free Online AntiMalware Resources

Post back with those results and we'll move on from there.
My System SpecsSystem Spec

31 May 2012   #4
Microsoft MVP


I have vision problems, and the content of what you pasted doesn't contain all of the information that is needed.
I do see that CPU temperatures are very high in the beginning, but not so high in the end. This could mean that the system is overheating (which can cause shutdowns and BSOD's)

I assume that we are having language problems. Unfortunately, I do not speak any other language.
What may I do to make this easier for you to understand?
My System SpecsSystem Spec

 My screen sometimes appear "No Signal" word and become a blank screen

Thread Tools

Similar help and support threads
Thread Forum
PCI-E(s) Giving "No Signal" Black Screen
Motherboard: AsRock Z75 Pro 3 Graphics Card: GeForce GTX 570 HD Also tried: MSI RX300HM-TD128E Power Supply: Corsair CX 750 The motherboard is new, as is the power supply. The graphics card (the GTX) isn't. I'm trying to make it work without having to reinstall 7. With the integrated graphics...
Graphic Cards
Message "No Input Signal" on Screen
Am looking at one of my club members PC and after using his firewire connection the screen went blank and showed the "No Input Signal". This PC has a separate graphics card and no onboard card so my first thought was the graphics card has fried! Tried 3 different monitors (all known to work) with...
Graphic Cards
"Windows Explorer Not Working" message on Start-up,causes blank screen
I recently received an old laptop that was factory restored from a relative, and started using to play games. Recently, however, I began to receive the message "windows explorer is not working" on startup, and about half the times it would go away and I would be able to use the computer (if i hit...
General Discussion
After monitor off + on: "No imput signal" + black screen
I started successfully my Windows 7+SP1 with newest patches and can work normally. Then I turn off my TFT monitor (not the running computer). Win7 continues to work (as hard disc LED indicator and remote control tools prove). Later I try to turn on my monitor again. But much to my...
Graphic Cards
Screen blanks... "no signal" error
Hi all Hope you can help with this problem... SYSTEM SPECS ASUS P7P55D-E PRO Intel i5-760 with Thermalright MUX-120 cooler Sapphire ATI Radeon HD 5770 graphics card 2 x Corsair DDR3 2GB DIMMs Windows 7 Professional 64 bit
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:43.
Twitter Facebook Google+