Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD copying from Network Share to Synology DS1812+ NAS

30 May 2012   #1

WIndows 7 64 bit Ultimate
BSOD copying from Network Share to Synology DS1812+ NAS

I would appreciate any help troubleshooting the below issue.

I have a Mac Mini (running OS X) which has a USB Drive connected to it.

The Mac Mini's USB drive is mounted as a share in Windows 7 Ultimate 64x fully patched. I am running on a custom built machine that has been stable for years and have had no hardware changes in the last few months, the most recent being the addition of an Crucial M4 SSD as the boot drive.

I am copying (or trying to) 1.7TB of data from the mounted USB shared drive to a Synology Disk Station. I usually step away from the computer for an extended period of time as the transfer will take about 20 hours. When I go to check on the process the computer has restarted due to a BSOD. This has happened 2 times and I suspect will happen again.

To help troubleshoot I have uploaded the C:\Windows\Minidump\(3 files)
and The System Health Report per the BSOD Posting Instructions.

The MEMORY.DMP file is whopping 571MB (is that normal?) so I could not attach it. My expertise lies primarily in OS X, though I am in the process of moving over to Windows. Any help from the community would be greatly appreciated. If the MEMORY.DMP file is of importance I can find a way to get it to you.


The Computer:
CPU: Intel Core 2 Quad Q6600
Memory: 2x2GB Corsair 400.0 MHz (PC2-6400)/ 2x2GB Kingston 400.0 MHz (PC2-6400)
SSD Boot Drive:M4-CT256M4SSD2
NIC:RealTek Semiconductor RTL8168C/8111C PCI-E Gigabit Ethernet Adapter

My System SpecsSystem Spec
31 May 2012   #2

Win 8 Release candidate 8400

Related to atikmpag.sys AMD multi-vendor Miniport Driver from Advanced Micro Devices, Inc.

In addition please remove and replace Zone Alarm with MSE.

And dtsoftbous01.sys (from the makers of daemon tools)

Update these drivers

vncmirror.sys    3/14/2008 1:43:05 PM        fffff880`06d9b000    fffff880`06da2000    0x00007000    0x47dab929                        
Rt64win7.sys    2/26/2009 5:04:13 AM        fffff880`06d16000    fffff880`06d48000    0x00032000    0x49a65b0d                        
GEARAspiWDM.sys    5/18/2009 8:17:04 AM        fffff880`06d7e000    fffff880`06d8b000    0x0000d000    0x4a1151c0
How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
- - The most common drivers are listed on this page: Driver Reference Driver Reference
Driver Reference Table (DRT)
My System SpecsSystem Spec
31 May 2012   #3

Win 7 Ultimate 64-bit. SP1.

After you have followed zigzag's advice...

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

Read through the below & configure yours the same way.

To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 KB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec

27 Jun 2012   #4

WIndows 7 64 bit Ultimate

Thanks for the feedback. I have taken your recommendations into account but I still get random BSOD about once a week. I can't trace it back to any one activity. They all reference: atikmpag.sys

I am uploading 2 more minidump files for review. Thanks for any additional insight.

My System SpecsSystem Spec
28 Jun 2012   #5

Windows 7 Home Premium 64 Bit

Your crash reports indicate a possible problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.
Quote   Quote: Originally Posted by Brink
NOTE: The MGADIAG report does not contain any sensitive or personal information, and is best posted un-edited for us to be able to help.

7. Select (highlight) all of the MGADiag report that you just pasted, and click on the code box # toolbar icon to wrap the report in a code box when posted. (see screenshot below)

Attachment 218740
My System SpecsSystem Spec

 BSOD copying from Network Share to Synology DS1812+ NAS

Thread Tools

Similar help and support threads
Thread Forum
BSOD copying files from one network drive to another
I was not present at the time. User was copying lots of image files from one network drive to another
BSOD Help and Support
New W7 64 install -network issues? Network printer, SMB share & others
I've just had a new PC built for me, for the first time rather than build it myself I aid a local shop, and it's a pretty nice machine. They got windows up and running, when I got it back and lugged it in I don't even remember it asking about whether my network was home, work or public (I may be...
Network & Sharing
Slow file copying from Win 7 PC to other network PCs
I have a modest home network with two Windows 7 PCs and one Windows XP PC connected via a D-Link DIR-655 router. The XP machine and one of the 7 machines are connected to the router via gigabit ethernet ports, and the other PC by a wifi card. Internet download/upload speeds on the two wired...
Network & Sharing
BSOD when copying files via wired network
Hi I'm having this blue screen problem on my desktop after I updated to Windows 7 SP1. I always get a BSOD(0x0000007F - UNEXPECTED_KERNEL_MODE_TRAP) every time I copy files from my laptop via wired network. The dump file is attached, can somebody take a look and give advise? Thanks a lot.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:12.
Twitter Facebook Google+