BSOD at random times, mostly while gaming

I get a BSOD Memory Dump randomly on my computer.

It happens mostly when I play online games, the only games I play where this has happened are:

-League of Legends
-Starcraft
-Diablo 3

It's happened a handful of times at random while just browsing the internet and not doing much anything else.

I've attached the BSOD Dump & System File Collection files to this post as well as the System Resource Monitor file.

I've checked and updated all of the drivers on all pieces of hardware.

Here are my system specs:
OS - Windows 7 Ultimate 64 bit
CPU - AMD A6-3650 Llano
Motherboard - GIGABYTE GA-A55M-S2V FM1 AMD A55 (Hudson D2) Micro ATX AMD Memory - Patriot G series ‘Sector 5’ Edition 8GB (2 x 4GB) 240-Pin DD
Graphics Card - PowerColor AX6670 1GBK3-H Radeon HD 6670 1GB 128-bit DDR3 PC
Hard Disk Drive - HITACHI HDS721050CLA362 (0F10381) 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Power Supply - RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready
Case - Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case
Cooling - Case comes with Three Fans-1x Front Blue LED 120mm Fan, 1x

Here are some of the error codes that come up after Windows restarts:

*********************
Example 1:
*********************
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80075CA028
BCP3: 00000000B2344000
BCP4: 0000000000000175
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

******************************
Example 2
******************************
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 50
BCP1: FFFFF80009761BC8
BCP2: 0000000000000001
BCP3: FFFFF9600009C646
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Any help is GREATLY appreciated thank you for taking the time to look at this!

Bump

You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.

   Warning

Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.

• If you are overclocking any hardware, please stop.
  
  
• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  
  
  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
  
  Once these steps have been followed, it is safe to remove and replace components within your computer.

Remember to read closely through Stop 0x124 - what it means and what to try for the crash.


You also had a 0x101 crash: STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

Some of the above steps apply to that crash, as well.

Wow, thank you for all of the information!

@ writhziden - Thank you, I read over the 0x124 crash information and am in the process of running the various tests outlined in your post. Will post back with the results of those tests tomorrow since these will take some time to compile.

@ James7679 - Thank you! I've attached the tabs as screenshots and saved the report as a txt file in the zip file attached to this reply.

I really appreciate you guys taking the time to look at this.

BSOD during gaming are often, if not mostly, related to Timeout Detection and Recovery issues but as well they can happen while doin literally nothing.
Very annoying and a known issue since Win Vista yet Nvidia,Ati and Microsoft failed completely to adress this issue to solve it once and for all.
This article sheds some light on the thing.
Timeout Detection and Recovery (TDR)
In short version: Graphics driver has to sent a ping every X seconds to OS. If it fails for whatever reason the OS shuts down to prevent damage to OS cause it thinks a critical error occured.
Its like train drivers nowadays have to hit a button every 30 or 60 seconds to confirm they are not sleeping or dead otherwise the Train commences automatic emergency braking.
Increasing the TimeOut to 60 seconds or disabling the TDR check completely in the Registry helps a lot and sometimes even solves this issue completely. Its only a workaround though
TDR Registry Keys

James7679, Here are the screens after running P95 small FFT stress test for an hour, it seems that the cpu avg temp leveled out at 43 degrees Celsius

I will run the other more RAM intensive P95 tests tomorrow.

I ran FurMark, and the AMD Radeon HD 6670 temp evened out around 43 degrees Celsius. Furmark would not stress test the AMD 6530D APU, this APU seemed stress tested when running P95 as the APU temp was the same as the CPU. Probably because its a built in GPU in the processor.

I'll be running Memtest86+ tonight and will post the results tomorrow.

Speccy is the only program running thats giving me any type of temperatures, FurMark crashes when I enable logging when running the GPU stress test.

Thank you all again for looking into this and all the suggestions I really appreciate it!

I've come to an impasse with the Memtest86+ as I don't have a CD to burn the iso to and for some reason will not read my USB flash drive at boot to run the memtest program.

I've set the boot menu to read my USB but it still doesn't work and I followed the instructions to install it to my flash drive correctly.

I will uninstall the EasyTune6, as far as overclocking I will lookup how to do it properly, I havent configured anything that im aware of that would allow it to overclock. (noob in this department)