Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD after BSOD, computer is very unstabil and crashes randomly

07 Jun 2012   #1

Windows 7 Home Premium 32-bit
BSOD after BSOD, computer is very unstabil and crashes randomly

Hi guys,

I am new on this forum, this is my first post here. I read plenty of other threads but i can`t find the solution for the problems I have.

I am running my system with Windows 7 Home Premium 32-bit. This works fine after 3 or 4 years, but the last time it crashes every day a few times. I installed all the new necessary drivers. The last driver for my Geforce 8400M GS is released on 15-5-2012. I`ve done 2 clean installations of Windows booting it from the DVD, formatting and install it again, but no result.

Please is there anybody who wants to help me, because i am at a point now to buy a complete new laptop

My System SpecsSystem Spec
07 Jun 2012   #2

Windows 7 Home Premium 32-bit


I`am very thankfull if somebody wants to look at my problem!


My System SpecsSystem Spec
08 Jun 2012   #3

Windows 7 Home Premium 32-bit

My System SpecsSystem Spec

08 Jun 2012   #4

Windows 7 Home Premium 32-bit

*Last bump*

Why does nobody wants to help me? Is it because I am a new member or is the info too less?
I would be very thanfull!
My System SpecsSystem Spec
08 Jun 2012   #5

Windows 10 Pro x64, Arch Linux

This is a TDR116 Error which is typically caused by your display driver or a defect in your RAM/GPU. The Nvidia 8000 Series is known to have overheating issues/memory problems.

Run a Video Memory Test with OCCT
NVIDIA/AMD Video Card - Test with OCCT

STOP 0x116: VIDEO_TDR_ERROR troubleshooting
RAM - Test with Memtest86+
SFC /SCANNOW Command - System File Checker

Post back with your results.
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Attempt to reset the display driver and recover from timeout failed.
Arg1: 863fd008, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: 9117bed8, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 00000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 00000002, Optional internal context dependent data.

Debugging Details:

9117bed8 55              push    ebp






8cc57b74 91bbd07b 00000116 863fd008 9117bed8 nt!KeBugCheckEx+0x1e
8cc57b98 91bb1937 9117bed8 00000000 00000002 dxgkrnl!TdrBugcheckOnTimeout+0x8d
8cc57bbc 9100692c 00000000 00000102 86efa450 dxgkrnl!TdrIsRecoveryRequired+0xb8
8cc57c34 91030944 fffffcfb 000006e0 00000000 dxgmms1!VidSchiReportHwHang+0x3c0
8cc57c5c 91031065 00000000 00000000 00000000 dxgmms1!VidSchiCheckHwProgress+0x68
8cc57c98 9100d8f0 8cc57c90 82843539 86efa450 dxgmms1!VidSchiWaitForSchedulerEvents+0x1b1
8cc57d28 910323c9 86efa450 82843539 86efa450 dxgmms1!VidSchiScheduleCommandToRun+0xaa
8cc57d3c 91032485 86efa450 00000000 86f0a030 dxgmms1!VidSchiRun_PriorityTable+0xf
8cc57d50 82a15056 86efa450 a83d939c 00000000 dxgmms1!VidSchiWorkerThread+0x7f
8cc57d90 828bd1a9 91032406 86efa450 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19

STACK_COMMAND:  .bugcheck ; kb

9117bed8 55              push    ebp

SYMBOL_NAME:  nvlddmkm+13eed8

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nvlddmkm

IMAGE_NAME:  nvlddmkm.sys


FAILURE_BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys

BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys

Followup: MachineOwner
My System SpecsSystem Spec
30 Jun 2012   #6

Windows 7 Ultimate 64bit

I've read your post.. I had the same problem witha 8400m G on an Acer 7520.. Unfortunately the 8m series of GPUs has a factory problem... The only way to repair it temporarily is to take out the card from your laptop, wipe out the cooling paste and put it in the hoven at 200 degrees Celsius for 10-12 minutes.. No I'm not joking.. That way the solderings can reform.. Try it out, it worked for me..
My System SpecsSystem Spec

 BSOD after BSOD, computer is very unstabil and crashes randomly

Thread Tools

Similar help and support threads
Thread Forum
3 different BSOD crashes happens randomly
Hello ! im experiencing 3 kinds of BSOD crashes and i cant figure solutions for each one help please dumps files are joined !
BSOD Help and Support
BSOD Randomly Restarts/Crashes my computer
I don't know what's wrong but my computer crashes randomly from time to time. Says something about "MiniDump" and "Blue Screen." please help, thanks!
BSOD Help and Support
BSOD randomly crashes
I'm not exactly sure what is going on with my system so I ran the utility and have the file attached here.
BSOD Help and Support
Idle computer crashes to BSOD, also happens randomly while surfing web
I'm at a loss to what's happening, I keep getting BSOD while doing various activities. All BSOD seeem to be associated with this exe, ntosknl.exe. I have already done a complete install win7 pro X'3 on different hard drives same error, I have run memtest86 on my memory, I have used a dianostic...
BSOD Help and Support
Computer Crashes Randomly? BSOD / Restart
Hey guys. My computer randomly crashes and sometimes gives a BSOD (I think driver power state failure) other times it instantly start a restart. System Specs: Windows 7 Professional 32 bit Intel Pentium Dual Core E2140 (1.6ghz) Nvidia 7900GT 2048mb RAM Cooler Master extreme power duo...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:12.
Twitter Facebook Google+