bsod even after complete new windows setup


  1. Posts : 2
    Windows 7 home basic x64
       #1

    bsod even after complete new windows setup


    hi,
    my system is showing blue screen randomly even after i got repaired (for same problem they formatted the whole hard disk n said that the os earlier was correpted ) it from the authorized service centre of vaio.
    but still i am not getting rid of these blue screens.
    blue screen are randomly occurring and the bluescreenview is always showing ntoskrnl.exe the culprit.

    sfc\scan doest reports any error.

    i have attached the mini dumps files :

    system model :
    sony vaio
    vpceh26en
    system specs are :
    Operating System
    Operating System Genuine Windows® 7 Home Basic with Service Pack 1 64-bit (English Version)
    Architecture
    Processor Name Intel® Core™ i3-2330M Processor 2.20 GHz*1
    Chipset Intel® HM65 Express Chipset
    Cache Memory 3 MB (L3 Cache)
    Main Memory
    Pre-installed/Max 4 GB (4 GB (SO-DIMM) x 1) DDR3 SDRAM*2
    Memory Speed 1333 MT/s
    Hard Disk Drive
    Hard Disk Drive 500 GB*4 (Serial ATA, 5400 rpm)

    Graphics
    Graphics Accelerator NVIDIA® GeForce® 410M GPU
    Dedicated Video Memory 512 MB DDR3


    plz help
    a huge thnx in advance
      My Computer


  2. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #2

    This is likely a RAM issue, run this test:
    RAM - Test with Memtest86+
    And Disk Check

    Run MemTest86+ for at least 7 passes and post back with your results.
    Code:
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    it must be protected by a Probe.  Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: fffff8a2021d8790, memory referenced.
    Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
    Arg3: fffff880012b0b9f, If non-zero, the instruction address which referenced the bad memory
        address.
    Arg4: 0000000000000005, (reserved)
      My Computer


  3. Posts : 2
    Windows 7 home basic x64
    Thread Starter
       #3

    yes 5 error were detected by the memtest
    the result is attached in jpg format.

    what i have to do now!!!!!!!!
      My Computer


  4. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #4

    sammaurya said:
    yes 5 error were detected by the memtest
    the result is attached in jpg format.

    what i have to do now!!!!!!!!
    You should replace your RAM sticks, they are defective. If you have mutiple RAM sticks, test them individually to identify the defective one(s) :)
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:40.
Find Us