BSOD 0x00000024 related to USB eLiscenser driver?

Page 2 of 2 FirstFirst 12

  1. Posts : 16
    Windows 7 Home Premium x64
    Thread Starter
       #11

    writhziden said:
    Security Software: ??? Make sure to install security software. I recommend either of these:
    After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


    Recommend removing your ASUS utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability.


    Update the following driver:
    Code:
    synusb64.sys Fri Jun 26 07:30:11 2009 (4A44CD63)
    The above is your SIA Syncsoft USB protection software. If you cannot find an update for it, I would recommend removing it.


    Crashes point to memory. We should check your RAM compatibility. Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
    Did you not read my post at all? I said I already have Malwarebytes. And I WILL NOT uninstall syncsoft software because I NEED it, it is also as up to date as it can possibly get. If I can't use Syncsoft USB software I mind as well just throw my computer in the trash because that is the main use for it.

    I attached the CPU-Z Screenshots
      My Computer


  2. Posts : 51,467
    Windows 11 Workstation x64
       #12

    If you want to be rude to those helping please go elsewhere as I will not allow it here.

    Somebody has given there own time to try to help you out, the least you can do is thank them and give a civil response.
      My Computers


  3. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #13

    Thank you John. I appreciate you jumping in. :)


    Malwarebytes is great for catching malware. It does not stop most viruses or hacks to the system. Malware and viruses/hacks are often considered separate entities.


    You will also note that I said I recommend removing it. I did not say you had to. It is your system, and it is your choice what to do with it and how to handle it. If you want to keep it, you may consider contacting the developer of that driver and asking for their support(Syncsoft? I find no mention of them with a cursory Google search to help you contact them, but an in depth Google search may help you succeed where I failed). My apologies for not being more helpful in this regard.


    Your processor will only support up to 667 (1333) MHz on the RAM; that is a likely candidate for your crashes.
    Support for unregistered DIMMs up to PC2 8500(DDR2-1066MHz) and PC3 10600 (DDR3-1333MHz)
    The above quote was taken from: AMD Phenom

    Further reading:

    System Building and Compatibility

    AMD Memory for Systems
      My Computer


  4. Posts : 16
    Windows 7 Home Premium x64
    Thread Starter
       #14

    z3r010 said:
    If you want to be rude to those helping please go elsewhere as I will not allow it here.

    Somebody has given there own time to try to help you out, the least you can do is thank them and give a civil response.
    Sorry, I get over zealous and too aggitated sometimes with these stupid errors.

    I apologize.


    But anyway, yeah I'm gonna take a guess say it's the RAM then I'll have to order some 1333 RAM.
      My Computer


  5. Posts : 16
    Windows 7 Home Premium x64
    Thread Starter
       #15

    Ok so I'm still getting alot of BSOD's. I just replaced my RAM with the propper RAM for my CPU. 10600, 1333 MHz.

    I'm guessing it's CPU by now.
    Attached the dump files.
      My Computer


  6. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #16

    Glad you replaced the memory. That should yield better stability going forward.

    Your crashes still point to memory, however. Your processor memory controller may be damaged as you say, or it could be your motherboard. Check your processor:
    Please provide your idle temperatures and your temperatures under stress.


    Also, you still have not run the security checks for viruses/malware or installed antivirus software yet. The crashes you are getting may indicate malware/viruses on the system.


    Your crashes also may indicate that you bought incompatible RAM. James has mentioned this in your other thread. Given that you cannot follow our instructions, I feel it is best if I leave you to your own methods. I need to help people who will help themselves.
    Last edited by writhziden; 25 Jun 2012 at 12:42. Reason: Your other thread.
      My Computer


 
Page 2 of 2 FirstFirst 12

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:50.
Find Us